Current File : //proc/self/root/proc/self/root/opt/cpanel/libcurl/share/doc/ea-libcurl-devel/http2-upload.c
/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* SPDX-License-Identifier: curl
*
***************************************************************************/
/* <DESC>
* Multiplexed HTTP/2 uploads over a single connection
* </DESC>
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <errno.h>
/* somewhat unix-specific */
#include <sys/time.h>
#include <unistd.h>
/* curl stuff */
#include <curl/curl.h>
#include <curl/mprintf.h>
#ifndef CURLPIPE_MULTIPLEX
/* This little trick will just make sure that we do not enable pipelining for
libcurls old enough to not have this symbol. It is _not_ defined to zero in
a recent libcurl header. */
#define CURLPIPE_MULTIPLEX 0
#endif
#define NUM_HANDLES 1000
struct input {
FILE *in;
size_t bytes_read; /* count up */
CURL *hnd;
int num;
};
static
void dump(const char *text, int num, unsigned char *ptr, size_t size,
char nohex)
{
size_t i;
size_t c;
unsigned int width = 0x10;
if(nohex)
/* without the hex output, we can fit more on screen */
width = 0x40;
fprintf(stderr, "%d %s, %lu bytes (0x%lx)\n",
num, text, (unsigned long)size, (unsigned long)size);
for(i = 0; i<size; i += width) {
fprintf(stderr, "%4.4lx: ", (unsigned long)i);
if(!nohex) {
/* hex not disabled, show it */
for(c = 0; c < width; c++)
if(i + c < size)
fprintf(stderr, "%02x ", ptr[i + c]);
else
fputs(" ", stderr);
}
for(c = 0; (c < width) && (i + c < size); c++) {
/* check for 0D0A; if found, skip past and start a new line of output */
if(nohex && (i + c + 1 < size) && ptr[i + c] == 0x0D &&
ptr[i + c + 1] == 0x0A) {
i += (c + 2 - width);
break;
}
fprintf(stderr, "%c",
(ptr[i + c] >= 0x20) && (ptr[i + c]<0x80)?ptr[i + c]:'.');
/* check again for 0D0A, to avoid an extra \n if it's at width */
if(nohex && (i + c + 2 < size) && ptr[i + c + 1] == 0x0D &&
ptr[i + c + 2] == 0x0A) {
i += (c + 3 - width);
break;
}
}
fputc('\n', stderr); /* newline */
}
}
static
int my_trace(CURL *handle, curl_infotype type,
char *data, size_t size,
void *userp)
{
char timebuf[60];
const char *text;
struct input *i = (struct input *)userp;
int num = i->num;
static time_t epoch_offset;
static int known_offset;
struct timeval tv;
time_t secs;
struct tm *now;
(void)handle; /* prevent compiler warning */
gettimeofday(&tv, NULL);
if(!known_offset) {
epoch_offset = time(NULL) - tv.tv_sec;
known_offset = 1;
}
secs = epoch_offset + tv.tv_sec;
now = localtime(&secs); /* not thread safe but we do not care */
curl_msnprintf(timebuf, sizeof(timebuf), "%02d:%02d:%02d.%06ld",
now->tm_hour, now->tm_min, now->tm_sec, (long)tv.tv_usec);
switch(type) {
case CURLINFO_TEXT:
fprintf(stderr, "%s [%d] Info: %s", timebuf, num, data);
/* FALLTHROUGH */
default: /* in case a new one is introduced to shock us */
return 0;
case CURLINFO_HEADER_OUT:
text = "=> Send header";
break;
case CURLINFO_DATA_OUT:
text = "=> Send data";
break;
case CURLINFO_SSL_DATA_OUT:
text = "=> Send SSL data";
break;
case CURLINFO_HEADER_IN:
text = "<= Recv header";
break;
case CURLINFO_DATA_IN:
text = "<= Recv data";
break;
case CURLINFO_SSL_DATA_IN:
text = "<= Recv SSL data";
break;
}
dump(text, num, (unsigned char *)data, size, 1);
return 0;
}
static size_t read_callback(char *ptr, size_t size, size_t nmemb, void *userp)
{
struct input *i = userp;
size_t retcode = fread(ptr, size, nmemb, i->in);
i->bytes_read += retcode;
return retcode;
}
static void setup(struct input *i, int num, const char *upload)
{
FILE *out;
char url[256];
char filename[128];
struct stat file_info;
curl_off_t uploadsize;
CURL *hnd;
hnd = i->hnd = curl_easy_init();
i->num = num;
curl_msnprintf(filename, 128, "dl-%d", num);
out = fopen(filename, "wb");
if(!out) {
fprintf(stderr, "error: could not open file %s for writing: %s\n", upload,
strerror(errno));
exit(1);
}
curl_msnprintf(url, 256, "https://localhost:8443/upload-%d", num);
/* get the file size of the local file */
if(stat(upload, &file_info)) {
fprintf(stderr, "error: could not stat file %s: %s\n", upload,
strerror(errno));
exit(1);
}
uploadsize = file_info.st_size;
i->in = fopen(upload, "rb");
if(!i->in) {
fprintf(stderr, "error: could not open file %s for reading: %s\n", upload,
strerror(errno));
exit(1);
}
/* write to this file */
curl_easy_setopt(hnd, CURLOPT_WRITEDATA, out);
/* we want to use our own read function */
curl_easy_setopt(hnd, CURLOPT_READFUNCTION, read_callback);
/* read from this file */
curl_easy_setopt(hnd, CURLOPT_READDATA, i);
/* provide the size of the upload */
curl_easy_setopt(hnd, CURLOPT_INFILESIZE_LARGE, uploadsize);
/* send in the URL to store the upload as */
curl_easy_setopt(hnd, CURLOPT_URL, url);
/* upload please */
curl_easy_setopt(hnd, CURLOPT_UPLOAD, 1L);
/* please be verbose */
curl_easy_setopt(hnd, CURLOPT_VERBOSE, 1L);
curl_easy_setopt(hnd, CURLOPT_DEBUGFUNCTION, my_trace);
curl_easy_setopt(hnd, CURLOPT_DEBUGDATA, i);
/* HTTP/2 please */
curl_easy_setopt(hnd, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_2_0);
/* we use a self-signed test server, skip verification during debugging */
curl_easy_setopt(hnd, CURLOPT_SSL_VERIFYPEER, 0L);
curl_easy_setopt(hnd, CURLOPT_SSL_VERIFYHOST, 0L);
#if (CURLPIPE_MULTIPLEX > 0)
/* wait for pipe connection to confirm */
curl_easy_setopt(hnd, CURLOPT_PIPEWAIT, 1L);
#endif
}
/*
* Upload all files over HTTP/2, using the same physical connection!
*/
int main(int argc, char **argv)
{
struct input trans[NUM_HANDLES];
CURLM *multi_handle;
int i;
int still_running = 0; /* keep number of running handles */
const char *filename = "index.html";
int num_transfers;
if(argc > 1) {
/* if given a number, do that many transfers */
num_transfers = atoi(argv[1]);
if(!num_transfers || (num_transfers > NUM_HANDLES))
num_transfers = 3; /* a suitable low default */
if(argc > 2)
/* if given a file name, upload this! */
filename = argv[2];
}
else
num_transfers = 3;
/* init a multi stack */
multi_handle = curl_multi_init();
for(i = 0; i<num_transfers; i++) {
setup(&trans[i], i, filename);
/* add the individual transfer */
curl_multi_add_handle(multi_handle, trans[i].hnd);
}
curl_multi_setopt(multi_handle, CURLMOPT_PIPELINING, CURLPIPE_MULTIPLEX);
/* We do HTTP/2 so let's stick to one connection per host */
curl_multi_setopt(multi_handle, CURLMOPT_MAX_HOST_CONNECTIONS, 1L);
do {
CURLMcode mc = curl_multi_perform(multi_handle, &still_running);
if(still_running)
/* wait for activity, timeout or "nothing" */
mc = curl_multi_poll(multi_handle, NULL, 0, 1000, NULL);
if(mc)
break;
} while(still_running);
curl_multi_cleanup(multi_handle);
for(i = 0; i<num_transfers; i++) {
curl_multi_remove_handle(multi_handle, trans[i].hnd);
curl_easy_cleanup(trans[i].hnd);
}
return 0;
}
Mini Shell