Current File : //proc/self/root/proc/self/root/usr/share/perl5/pod/perlhpux.pod
If you read this file _as_is_, just ignore the funny characters you see.
It is written in the POD format (see pod/perlpod.pod) which is specially
designed to be readable as is.
=head1 NAME
perlhpux - Perl version 5 on Hewlett-Packard Unix (HP-UX) systems
=head1 DESCRIPTION
This document describes various features of HP's Unix operating system
(HP-UX) that will affect how Perl version 5 (hereafter just Perl) is
compiled and/or runs.
=head2 Using perl as shipped with HP-UX
Application release September 2001, HP-UX 11.00 is the first to ship
with Perl. By the time it was perl-5.6.1 in /opt/perl. The first
occurrence is on CD 5012-7954 and can be installed using
swinstall -s /cdrom perl
assuming you have mounted that CD on /cdrom.
That build was a portable hppa-1.1 multithread build that supports large
files compiled with gcc-2.9-hppa-991112.
If you perform a new installation, then (a newer) Perl will be installed
automatically. Pre-installed HP-UX systems now have more recent versions
of Perl and the updated modules.
The official (threaded) builds from HP, as they are shipped on the
Application DVD/CD's are available on
L<http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=PERL>
for both PA-RISC and IPF (Itanium Processor Family). They are built
with the HP ANSI-C compiler. Up till 5.8.8 that was done by ActiveState.
To see what version is included on the DVD (assumed here to be mounted
on /cdrom), issue this command:
# swlist -s /cdrom perl
# perl D.5.8.8.B 5.8.8 Perl Programming Language
perl.Perl5-32 D.5.8.8.B 32-bit 5.8.8 Perl Programming Language
with Extensions
perl.Perl5-64 D.5.8.8.B 64-bit 5.8.8 Perl Programming Language
with Extensions
To see what is installed on your system:
# swlist -R perl
# perl E.5.8.8.J Perl Programming Language
# perl.Perl5-32 E.5.8.8.J 32-bit Perl Programming Language
with Extensions
perl.Perl5-32.PERL-MAN E.5.8.8.J 32-bit Perl Man Pages for IA
perl.Perl5-32.PERL-RUN E.5.8.8.J 32-bit Perl Binaries for IA
# perl.Perl5-64 E.5.8.8.J 64-bit Perl Programming Language
with Extensions
perl.Perl5-64.PERL-MAN E.5.8.8.J 64-bit Perl Man Pages for IA
perl.Perl5-64.PERL-RUN E.5.8.8.J 64-bit Perl Binaries for IA
=head2 Using perl from HP's porting centre
HP porting centre tries to keep up with customer demand and release
updates from the Open Source community. Having precompiled Perl binaries
available is obvious, though "up-to-date" is something relative. At the
moment of writing only perl-5.10.1 was available (with 5.16.3 being the
latest stable release from the porters point of view).
The HP porting centres are limited in what systems they are allowed
to port to and they usually choose the two most recent OS versions
available.
HP has asked the porting centre to move Open Source binaries
from /opt to /usr/local, so binaries produced since the start
of July 2002 are located in /usr/local.
One of HP porting centres URL's is L<http://hpux.connect.org.uk/>
The port currently available is built with GNU gcc.
=head2 Other prebuilt perl binaries
To get even more recent perl depots for the whole range of HP-UX, visit
H.Merijn Brand's site at L<http://mirrors.develooper.com/hpux/#Perl>.
Carefully read the notes to see if the available versions suit your needs.
=head2 Compiling Perl 5 on HP-UX
When compiling Perl, you must use an ANSI C compiler. The C compiler
that ships with all HP-UX systems is a K&R compiler that should only be
used to build new kernels.
Perl can be compiled with either HP's ANSI C compiler or with gcc. The
former is recommended, as not only can it compile Perl with no
difficulty, but also can take advantage of features listed later that
require the use of HP compiler-specific command-line flags.
If you decide to use gcc, make sure your installation is recent and
complete, and be sure to read the Perl INSTALL file for more gcc-specific
details.
=head2 PA-RISC
HP's HP9000 Unix systems run on HP's own Precision Architecture
(PA-RISC) chip. HP-UX used to run on the Motorola MC68000 family of
chips, but any machine with this chip in it is quite obsolete and this
document will not attempt to address issues for compiling Perl on the
Motorola chipset.
The version of PA-RISC at the time of this document's last update is 2.0,
which is also the last there will be. HP PA-RISC systems are usually
referred to with model description "HP 9000". The last CPU in this series
is the PA-8900. Support for PA-RISC architectured machines officially
ends as shown in the following table:
PA-RISC End-of-Life Roadmap
+--------+----------------+----------------+-----------------+
| HP9000 | Superdome | PA-8700 | Spring 2011 |
| 4-128 | | PA-8800/sx1000 | Summer 2012 |
| cores | | PA-8900/sx1000 | 2014 |
| | | PA-8900/sx2000 | 2015 |
+--------+----------------+----------------+-----------------+
| HP9000 | rp7410, rp8400 | PA-8700 | Spring 2011 |
| 2-32 | rp7420, rp8420 | PA-8800/sx1000 | 2012 |
| cores | rp7440, rp8440 | PA-8900/sx1000 | Autumn 2013 |
| | | PA-8900/sx2000 | 2015 |
+--------+----------------+----------------+-----------------+
| HP9000 | rp44x0 | PA-8700 | Spring 2011 |
| 1-8 | | PA-8800/rp44x0 | 2012 |
| cores | | PA-8900/rp44x0 | 2014 |
+--------+----------------+----------------+-----------------+
| HP9000 | rp34x0 | PA-8700 | Spring 2011 |
| 1-4 | | PA-8800/rp34x0 | 2012 |
| cores | | PA-8900/rp34x0 | 2014 |
+--------+----------------+----------------+-----------------+
From L<http://www.hp.com/products1/evolution/9000/faqs.html>
The last order date for HP 9000 systems was December 31, 2008.
A complete list of models at the time the OS was built is in the file
/usr/sam/lib/mo/sched.models. The first column corresponds to the last
part of the output of the "model" command. The second column is the
PA-RISC version and the third column is the exact chip type used.
(Start browsing at the bottom to prevent confusion ;-)
# model
9000/800/L1000-44
# grep L1000-44 /usr/sam/lib/mo/sched.models
L1000-44 2.0 PA8500
=head2 Portability Between PA-RISC Versions
An executable compiled on a PA-RISC 2.0 platform will not execute on a
PA-RISC 1.1 platform, even if they are running the same version of
HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that
Perl to also run on a PA-RISC 1.1, the compiler flags +DAportable and
+DS32 should be used.
It is no longer possible to compile PA-RISC 1.0 executables on either
the PA-RISC 1.1 or 2.0 platforms. The command-line flags are accepted,
but the resulting executable will not run when transferred to a PA-RISC
1.0 system.
=head2 PA-RISC 1.0
The original version of PA-RISC, HP no longer sells any system with this chip.
The following systems contained PA-RISC 1.0 chips:
600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850,
852, 855, 860, 865, 870, 890
=head2 PA-RISC 1.1
An upgrade to the PA-RISC design, it shipped for many years in many different
system.
The following systems contain with PA-RISC 1.1 chips:
705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 744, 745,
747, 750, 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811,
813, 816, 817, 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849,
851, 856, 857, 859, 867, 869, 877, 887, 891, 892, 897, A180, A180C,
B115, B120, B132L, B132L+, B160L, B180L, C100, C110, C115, C120,
C160L, D200, D210, D220, D230, D250, D260, D310, D320, D330, D350,
D360, D410, DX0, DX5, DXO, E25, E35, E45, E55, F10, F20, F30, G30,
G40, G50, G60, G70, H20, H30, H40, H50, H60, H70, I30, I40, I50, I60,
I70, J200, J210, J210XC, K100, K200, K210, K220, K230, K400, K410,
K420, S700i, S715, S744, S760, T500, T520
=head2 PA-RISC 2.0
The most recent upgrade to the PA-RISC design, it added support for
64-bit integer data.
As of the date of this document's last update, the following systems
contain PA-RISC 2.0 chips:
700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889,
893, 895, 896, 898, 899, A400, A500, B1000, B2000, C130, C140, C160,
C180, C180+, C180-XP, C200+, C400+, C3000, C360, C3600, CB260, D270,
D280, D370, D380, D390, D650, J220, J2240, J280, J282, J400, J410,
J5000, J5500XM, J5600, J7000, J7600, K250, K260, K260-EG, K270, K360,
K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000,
L2000, L3000, N4000, R380, R390, SD16000, SD32000, SD64000, T540,
T600, V2000, V2200, V2250, V2500, V2600
Just before HP took over Compaq, some systems were renamed. the link
that contained the explanation is dead, so here's a short summary:
HP 9000 A-Class servers, now renamed HP Server rp2400 series.
HP 9000 L-Class servers, now renamed HP Server rp5400 series.
HP 9000 N-Class servers, now renamed HP Server rp7400.
rp2400, rp2405, rp2430, rp2450, rp2470, rp3410, rp3440, rp4410,
rp4440, rp5400, rp5405, rp5430, rp5450, rp5470, rp7400, rp7405,
rp7410, rp7420, rp7440, rp8400, rp8420, rp8440, Superdome
The current naming convention is:
aadddd
||||`+- 00 - 99 relative capacity & newness (upgrades, etc.)
|||`--- unique number for each architecture to ensure different
||| systems do not have the same numbering across
||| architectures
||`---- 1 - 9 identifies family and/or relative positioning
||
|`----- c = ia32 (cisc)
| p = pa-risc
| x = ia-64 (Itanium & Itanium 2)
| h = housing
`------ t = tower
r = rack optimized
s = super scalable
b = blade
sa = appliance
=head2 Itanium Processor Family (IPF) and HP-UX
HP-UX also runs on the new Itanium processor. This requires the use
of a different version of HP-UX (currently 11.23 or 11i v2), and with
the exception of a few differences detailed below and in later sections,
Perl should compile with no problems.
Although PA-RISC binaries can run on Itanium systems, you should not
attempt to use a PA-RISC version of Perl on an Itanium system. This is
because shared libraries created on an Itanium system cannot be loaded
while running a PA-RISC executable.
HP Itanium 2 systems are usually referred to with model description
"HP Integrity".
=head2 Itanium, Itanium 2 & Madison 6
HP also ships servers with the 128-bit Itanium processor(s). The cx26x0
is told to have Madison 6. As of the date of this document's last update,
the following systems contain Itanium or Itanium 2 chips (this is likely
to be out of date):
BL60p, BL860c, BL870c, BL890c, cx2600, cx2620, rx1600, rx1620, rx2600,
rx2600hptc, rx2620, rx2660, rx2800, rx3600, rx4610, rx4640, rx5670,
rx6600, rx7420, rx7620, rx7640, rx8420, rx8620, rx8640, rx9610,
sx1000, sx2000
To see all about your machine, type
# model
ia64 hp server rx2600
# /usr/contrib/bin/machinfo
=head2 HP-UX versions
Not all architectures (PA = PA-RISC, IPF = Itanium Processor Family)
support all versions of HP-UX, here is a short list
HP-UX version Kernel Architecture End-of-factory support
------------- ------ ------------ ----------------------------------
10.20 32 bit PA 30-Jun-2003
11.00 32/64 PA 31-Dec-2006
11.11 11i v1 32/64 PA 31-Dec-2015
11.22 11i v2 64 IPF 30-Apr-2004
11.23 11i v2 64 PA & IPF 31-Dec-2015
11.31 11i v3 64 PA & IPF 31-Dec-2020 (PA) 31-Dec-2022 (IPF)
See for the full list of hardware/OS support and expected end-of-life
L<http://www.hp.com/go/hpuxservermatrix>
=head2 Building Dynamic Extensions on HP-UX
HP-UX supports dynamically loadable libraries (shared libraries).
Shared libraries end with the suffix .sl. On Itanium systems,
they end with the suffix .so.
Shared libraries created on a platform using a particular PA-RISC
version are not usable on platforms using an earlier PA-RISC version by
default. However, this backwards compatibility may be enabled using the
same +DAportable compiler flag (with the same PA-RISC 1.0 caveat
mentioned above).
Shared libraries created on an Itanium platform cannot be loaded on
a PA-RISC platform. Shared libraries created on a PA-RISC platform
can only be loaded on an Itanium platform if it is a PA-RISC executable
that is attempting to load the PA-RISC library. A PA-RISC shared
library cannot be loaded into an Itanium executable nor vice-versa.
To create a shared library, the following steps must be performed:
1. Compile source modules with +z or +Z flag to create a .o module
which contains Position-Independent Code (PIC). The linker will
tell you in the next step if +Z was needed.
(For gcc, the appropriate flag is -fpic or -fPIC.)
2. Link the shared library using the -b flag. If the code calls
any functions in other system libraries (e.g., libm), it must
be included on this line.
(Note that these steps are usually handled automatically by the extension's
Makefile).
If these dependent libraries are not listed at shared library creation
time, you will get fatal "Unresolved symbol" errors at run time when the
library is loaded.
You may create a shared library that refers to another library, which
may be either an archive library or a shared library. If this second
library is a shared library, this is called a "dependent library". The
dependent library's name is recorded in the main shared library, but it
is not linked into the shared library. Instead, it is loaded when the
main shared library is loaded. This can cause problems if you build an
extension on one system and move it to another system where the
libraries may not be located in the same place as on the first system.
If the referred library is an archive library, then it is treated as a
simple collection of .o modules (all of which must contain PIC). These
modules are then linked into the shared library.
Note that it is okay to create a library which contains a dependent
library that is already linked into perl.
Some extensions, like DB_File and Compress::Zlib use/require prebuilt
libraries for the perl extensions/modules to work. If these libraries
are built using the default configuration, it might happen that you
run into an error like "invalid loader fixup" during load phase.
HP is aware of this problem. Search the HP-UX cxx-dev forums for
discussions about the subject. The short answer is that B<everything>
(all libraries, everything) must be compiled with C<+z> or C<+Z> to be
PIC (position independent code). (For gcc, that would be
C<-fpic> or C<-fPIC>). In HP-UX 11.00 or newer the linker
error message should tell the name of the offending object file.
A more general approach is to intervene manually, as with an example for
the DB_File module, which requires SleepyCat's libdb.sl:
# cd .../db-3.2.9/build_unix
# vi Makefile
... add +Z to all cflags to create shared objects
CFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \
-I/usr/local/include -I/usr/include/X11R6
CXXFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \
-I/usr/local/include -I/usr/include/X11R6
# make clean
# make
# mkdir tmp
# cd tmp
# ar x ../libdb.a
# ld -b -o libdb-3.2.sl *.o
# mv libdb-3.2.sl /usr/local/lib
# rm *.o
# cd /usr/local/lib
# rm -f libdb.sl
# ln -s libdb-3.2.sl libdb.sl
# cd .../DB_File-1.76
# make distclean
# perl Makefile.PL
# make
# make test
# make install
As of db-4.2.x it is no longer needed to do this by hand. Sleepycat
has changed the configuration process to add +z on HP-UX automatically.
# cd .../db-4.2.25/build_unix
# env CFLAGS=+DD64 LDFLAGS=+DD64 ../dist/configure
should work to generate 64bit shared libraries for HP-UX 11.00 and 11i.
It is no longer possible to link PA-RISC 1.0 shared libraries (even
though the command-line flags are still present).
PA-RISC and Itanium object files are not interchangeable. Although
you may be able to use ar to create an archive library of PA-RISC
object files on an Itanium system, you cannot link against it using
an Itanium link editor.
=head2 The HP ANSI C Compiler
When using this compiler to build Perl, you should make sure that the
flag -Aa is added to the cpprun and cppstdin variables in the config.sh
file (though see the section on 64-bit perl below). If you are using a
recent version of the Perl distribution, these flags are set automatically.
Even though HP-UX 10.20 and 11.00 are not actively maintained by HP
anymore, updates for the HP ANSI C compiler are still available from
time to time, and it might be advisable to see if updates are applicable.
At the moment of writing, the latests available patches for 11.00 that
should be applied are PHSS_35098, PHSS_35175, PHSS_35100, PHSS_33036,
and PHSS_33902). If you have a SUM account, you can use it to search
for updates/patches. Enter "ANSI" as keyword.
=head2 The GNU C Compiler
When you are going to use the GNU C compiler (gcc), and you don't have
gcc yet, you can either build it yourself from the sources (available
from e.g. L<http://gcc.gnu.org/mirrors.html>) or fetch
a prebuilt binary from the HP porting center
at L<http://hpux.connect.org.uk/hppd/cgi-bin/search?term=gcc&Search=Search>
or from the DSPP (you need to be a member) at
L<http://h21007.www2.hp.com/portal/site/dspp/menuitem.863c3e4cbcdc3f3515b49c108973a801?ciid=2a08725cc2f02110725cc2f02110275d6e10RCRD&jumpid=reg_r1002_usen_c-001_title_r0001>
(Browse through the list, because there are often multiple versions of
the same package available).
Most mentioned distributions are depots. H.Merijn Brand has made prebuilt
gcc binaries available on L<http://mirrors.develooper.com/hpux/> and/or
L<http://www.cmve.net/~merijn/> for HP-UX 10.20 (only 32bit), HP-UX 11.00,
HP-UX 11.11 (HP-UX 11i v1), and HP-UX 11.23 (HP-UX 11i v2 PA-RISC) in both
32- and 64-bit versions. For HP-UX 11.23 IPF and HP-UX 11.31 IPF depots are
available too. The IPF versions do not need two versions of GNU gcc.
On PA-RISC you need a different compiler for 32-bit applications and for
64-bit applications. On PA-RISC, 32-bit objects and 64-bit objects do
not mix. Period. There is no different behaviour for HP C-ANSI-C or GNU
gcc. So if you require your perl binary to use 64-bit libraries, like
Oracle-64bit, you MUST build a 64-bit perl.
Building a 64-bit capable gcc on PA-RISC from source is possible only when
you have the HP C-ANSI C compiler or an already working 64-bit binary of
gcc available. Best performance for perl is achieved with HP's native
compiler.
=head2 Using Large Files with Perl on HP-UX
Beginning with HP-UX version 10.20, files larger than 2GB (2^31 bytes)
may be created and manipulated. Three separate methods of doing this
are available. Of these methods, the best method for Perl is to compile
using the -Duselargefiles flag to Configure. This causes Perl to be
compiled using structures and functions in which these are 64 bits wide,
rather than 32 bits wide. (Note that this will only work with HP's ANSI
C compiler. If you want to compile Perl using gcc, you will have to get
a version of the compiler that supports 64-bit operations. See above for
where to find it.)
There are some drawbacks to this approach. One is that any extension
which calls any file-manipulating C function will need to be recompiled
(just follow the usual "perl Makefile.PL; make; make test; make install"
procedure).
The list of functions that will need to recompiled is:
creat, fgetpos, fopen,
freopen, fsetpos, fstat,
fstatvfs, fstatvfsdev, ftruncate,
ftw, lockf, lseek,
lstat, mmap, nftw,
open, prealloc, stat,
statvfs, statvfsdev, tmpfile,
truncate, getrlimit, setrlimit
Another drawback is only valid for Perl versions before 5.6.0. This
drawback is that the seek and tell functions (both the builtin version
and POSIX module version) will not perform correctly.
It is strongly recommended that you use this flag when you run
Configure. If you do not do this, but later answer the question about
large files when Configure asks you, you may get a configuration that
cannot be compiled, or that does not function as expected.
=head2 Threaded Perl on HP-UX
It is possible to compile a version of threaded Perl on any version of
HP-UX before 10.30, but it is strongly suggested that you be running on
HP-UX 11.00 at least.
To compile Perl with threads, add -Dusethreads to the arguments of
Configure. Verify that the -D_POSIX_C_SOURCE=199506L compiler flag is
automatically added to the list of flags. Also make sure that -lpthread
is listed before -lc in the list of libraries to link Perl with. The
hints provided for HP-UX during Configure will try very hard to get
this right for you.
HP-UX versions before 10.30 require a separate installation of a POSIX
threads library package. Two examples are the HP DCE package, available
on "HP-UX Hardware Extensions 3.0, Install and Core OS, Release 10.20,
April 1999 (B3920-13941)" or the Freely available PTH package, available
on H.Merijn's site (L<http://mirrors.develooper.com/hpux/>). The use of PTH
will be unsupported in perl-5.12 and up and is rather buggy in 5.11.x.
If you are going to use the HP DCE package, the library used for threading
is /usr/lib/libcma.sl, but there have been multiple updates of that
library over time. Perl will build with the first version, but it
will not pass the test suite. Older Oracle versions might be a compelling
reason not to update that library, otherwise please find a newer version
in one of the following patches: PHSS_19739, PHSS_20608, or PHSS_23672
reformatted output:
d3:/usr/lib 106 > what libcma-*.1
libcma-00000.1:
HP DCE/9000 1.5 Module: libcma.sl (Export)
Date: Apr 29 1996 22:11:24
libcma-19739.1:
HP DCE/9000 1.5 PHSS_19739-40 Module: libcma.sl (Export)
Date: Sep 4 1999 01:59:07
libcma-20608.1:
HP DCE/9000 1.5 PHSS_20608 Module: libcma.1 (Export)
Date: Dec 8 1999 18:41:23
libcma-23672.1:
HP DCE/9000 1.5 PHSS_23672 Module: libcma.1 (Export)
Date: Apr 9 2001 10:01:06
d3:/usr/lib 107 >
If you choose for the PTH package, use swinstall to install pth in
the default location (/opt/pth), and then make symbolic links to the
libraries from /usr/lib
# cd /usr/lib
# ln -s /opt/pth/lib/libpth* .
For building perl to support Oracle, it needs to be linked with libcl
and libpthread. So even if your perl is an unthreaded build, these
libraries might be required. See "Oracle on HP-UX" below.
=head2 64-bit Perl on HP-UX
Beginning with HP-UX 11.00, programs compiled under HP-UX can take
advantage of the LP64 programming environment (LP64 means Longs and
Pointers are 64 bits wide), in which scalar variables will be able
to hold numbers larger than 2^32 with complete precision. Perl has
proven to be consistent and reliable in 64bit mode since 5.8.1 on
all HP-UX 11.xx.
As of the date of this document, Perl is fully 64-bit compliant on
HP-UX 11.00 and up for both cc- and gcc builds. If you are about to
build a 64-bit perl with GNU gcc, please read the gcc section carefully.
Should a user have the need for compiling Perl in the LP64 environment,
use the -Duse64bitall flag to Configure. This will force Perl to be
compiled in a pure LP64 environment (with the +DD64 flag for HP C-ANSI-C,
with no additional options for GNU gcc 64-bit on PA-RISC, and with
-mlp64 for GNU gcc on Itanium).
If you want to compile Perl using gcc, you will have to get a version of
the compiler that supports 64-bit operations.)
You can also use the -Duse64bitint flag to Configure. Although there
are some minor differences between compiling Perl with this flag versus
the -Duse64bitall flag, they should not be noticeable from a Perl user's
perspective. When configuring -Duse64bitint using a 64bit gcc on a
pa-risc architecture, -Duse64bitint is silently promoted to -Duse64bitall.
In both cases, it is strongly recommended that you use these flags when
you run Configure. If you do not use do this, but later answer the
questions about 64-bit numbers when Configure asks you, you may get a
configuration that cannot be compiled, or that does not function as
expected.
=head2 Oracle on HP-UX
Using perl to connect to Oracle databases through DBI and DBD::Oracle
has caused a lot of people many headaches. Read README.hpux in the
DBD::Oracle for much more information. The reason to mention it here
is that Oracle requires a perl built with libcl and libpthread, the
latter even when perl is build without threads. Building perl using
all defaults, but still enabling to build DBD::Oracle later on can be
achieved using
Configure -A prepend:libswanted='cl pthread ' ...
Do not forget the space before the trailing quote.
Also note that this does not (yet) work with all configurations,
it is known to fail with 64-bit versions of GCC.
=head2 GDBM and Threads on HP-UX
If you attempt to compile Perl with (POSIX) threads on an 11.X system
and also link in the GDBM library, then Perl will immediately core dump
when it starts up. The only workaround at this point is to relink the
GDBM library under 11.X, then relink it into Perl.
the error might show something like:
Pthread internal error: message: __libc_reinit() failed, file: ../pthreads/pthread.c, line: 1096
Return Pointer is 0xc082bf33
sh: 5345 Quit(coredump)
and Configure will give up.
=head2 NFS filesystems and utime(2) on HP-UX
If you are compiling Perl on a remotely-mounted NFS filesystem, the test
io/fs.t may fail on test #18. This appears to be a bug in HP-UX and no
fix is currently available.
=head2 HP-UX Kernel Parameters (maxdsiz) for Compiling Perl
By default, HP-UX comes configured with a maximum data segment size of
64MB. This is too small to correctly compile Perl with the maximum
optimization levels. You can increase the size of the maxdsiz kernel
parameter through the use of SAM.
When using the GUI version of SAM, click on the Kernel Configuration
icon, then the Configurable Parameters icon. Scroll down and select
the maxdsiz line. From the Actions menu, select the Modify Configurable
Parameter item. Insert the new formula into the Formula/Value box.
Then follow the instructions to rebuild your kernel and reboot your
system.
In general, a value of 256MB (or "256*1024*1024") is sufficient for
Perl to compile at maximum optimization.
=head1 nss_delete core dump from op/pwent or op/grent
You may get a bus error core dump from the op/pwent or op/grent
tests. If compiled with -g you will see a stack trace much like
the following:
#0 0xc004216c in () from /usr/lib/libc.2
#1 0xc00d7550 in __nss_src_state_destr () from /usr/lib/libc.2
#2 0xc00d7768 in __nss_src_state_destr () from /usr/lib/libc.2
#3 0xc00d78a8 in nss_delete () from /usr/lib/libc.2
#4 0xc01126d8 in endpwent () from /usr/lib/libc.2
#5 0xd1950 in Perl_pp_epwent () from ./perl
#6 0x94d3c in Perl_runops_standard () from ./perl
#7 0x23728 in S_run_body () from ./perl
#8 0x23428 in perl_run () from ./perl
#9 0x2005c in main () from ./perl
The key here is the C<nss_delete> call. One workaround for this
bug seems to be to create add to the file F</etc/nsswitch.conf>
(at least) the following lines
group: files
passwd: files
Whether you are using NIS does not matter. Amazingly enough,
the same bug also affects Solaris.
=head1 error: pasting ")" and "l" does not give a valid preprocessing token
There seems to be a broken system header file in HP-UX 11.00 that
breaks perl building in 32bit mode with GNU gcc-4.x causing this
error. The same file for HP-UX 11.11 (even though the file is older)
does not show this failure, and has the correct definition, so the
best fix is to patch the header to match:
--- /usr/include/inttypes.h 2001-04-20 18:42:14 +0200
+++ /usr/include/inttypes.h 2000-11-14 09:00:00 +0200
@@ -72,7 +72,7 @@
#define UINT32_C(__c) __CONCAT_U__(__c)
#else /* __LP64 */
#define INT32_C(__c) __CONCAT__(__c,l)
-#define UINT32_C(__c) __CONCAT__(__CONCAT_U__(__c),l)
+#define UINT32_C(__c) __CONCAT__(__c,ul)
#endif /* __LP64 */
#define INT64_C(__c) __CONCAT_L__(__c,l)
=head1 Redeclaration of "sendpath" with a different storage class specifier
The following compilation warnings may happen in HP-UX releases
earlier than 11.31 but are harmless:
cc: "/usr/include/sys/socket.h", line 535: warning 562:
Redeclaration of "sendfile" with a different storage class
specifier: "sendfile" will have internal linkage.
cc: "/usr/include/sys/socket.h", line 536: warning 562:
Redeclaration of "sendpath" with a different storage class
specifier: "sendpath" will have internal linkage.
They seem to be caused by broken system header files, and also other
open source projects are seeing them. The following HP-UX patches
should make the warnings go away:
CR JAGae12001: PHNE_27063
Warning 562 on sys/socket.h due to redeclaration of prototypes
CR JAGae16787:
Warning 562 from socket.h sendpath/sendfile -D_FILEFFSET_BITS=64
CR JAGae73470 (11.23)
ER: Compiling socket.h with cc -D_FILEFFSET_BITS=64 warning 267/562
=head1 Miscellaneous
HP-UX 11 Y2K patch "Y2K-1100 B.11.00.B0125 HP-UX Core OS Year 2000
Patch Bundle" has been reported to break the io/fs test #18 which
tests whether utime() can change timestamps. The Y2K patch seems to
break utime() so that over NFS the timestamps do not get changed
(on local filesystems utime() still works). This has probably been
fixed on your system by now.
=head1 AUTHOR
H.Merijn Brand <h.m.brand@xs4all.nl>
Jeff Okamoto <okamoto@corp.hp.com>
With much assistance regarding shared libraries from Marc Sabatella.
=cut
Mini Shell