Current File : //proc/self/root/proc/thread-self/root/usr/share/ghostscript/Resource/Init/gs_cidfn.ps
% Copyright (C) 2001-2022 Artifex Software, Inc.
% All Rights Reserved.
%
% This software is provided AS-IS with no warranty, either express or
% implied.
%
% This software is distributed under license and may not be copied,
% modified or distributed except as expressly authorized under the terms
% of the license contained in the file LICENSE in this distribution.
%
% Refer to licensing information at http://www.artifex.com or contact
% Artifex Software, Inc., 1305 Grant Avenue - Suite 200, Novato,
% CA 94945, U.S.A., +1(415)492-9861, for further information.
%
% ProcSet for implementing CIDFont and CIDMap resources.
% When this is run, systemdict is still writable.
% ---------------- Defining CIDFont resources ---------------- %
% Define a CIDFont resource. This is the defineresource implementation for
% the CIDFont resource category.
/.checkfonttype { % <cidfont> <fonttype> .checkfonttype <cidfont> <new?>
1 index /FID known {
1 index /FontType get ne {
/definefont cvx /invalidfont signalerror
} if //false
} {
1 index /FontType 3 -1 roll put //true
} ifelse
} bind def
/.cidfonttypes where { pop } { /.cidfonttypes 6 dict def } ifelse
.cidfonttypes
30 dict begin
/.gcompatstringcopy % <string> <global> .gcompatstringcopy <string>
{
dup 2 index gcheck eq
{ pop }
{
currentglobal 3 1 roll setglobal
dup length string copy
exch setglobal
} ifelse
} bind def
% The key in .cidfonttypes is the CIDFontType value;
% the value is a procedure that takes a font name and the CIDFont dictionary
% and replaces the latter with a real font.
% ------ CIDFontType 0 (FontType 9) ------ %
% We add the following entries to the CIDFont dictionary, in addition to
% the ones documented by Adobe:
% SubrCache - dictionary for caching Subr arrays
% For CIDFonts where we read the data from disk incrementally:
% GlyphData is 0 (arbitrary)
% DataSource - a ReusableStreamDecode filter for the data
% We also add a FID entry, and possibly a Subrs entry, to each element of
% FDArray.
dup 0 {
9 //.checkfonttype exec {
/CIDInit /ProcSet findresource begin
.completefont9
end
} if
1 index exch .buildfont9
.currentresourcefile dup type /filetype eq { //.filename {1 index gcheck //.gcompatstringcopy exec 1 index exch /ResourcePath exch put} if }{ pop} ifelse
exch pop
} put % Don't bind it here, because gs_fapi.ps redefines .buildfont9
% Add entries to a new CIDFontType 0 font per documentation (FontMatrix)
% or for .buildfont9 (FDArray.Private.Subrs).
/.completefont9 { % <cidfont0> .completefont9 <cidfont0>
currentglobal 3 1 roll dup gcheck setglobal
dup /FontMatrix known {
dup /FDArray get {
dup /FontMatrix get 0 get 1000000 ge {
/FontMatrix matrix put % Bug 688517
} {
pop
} ifelse
} forall
} {
dup /FontMatrix [0.001 0 0 0.001 0 0] put
dup /FDArray get {
currentglobal exch dup gcheck setglobal
dup /FontMatrix get {1000 0 0 1000 0 0} matrix concatmatrix
/FontMatrix exch put
setglobal
} forall
} ifelse
dup /FDArray get {
% Read the Subrs if necessary.
dup /Private get dup /Subrs known not {
dup /SubrCount .knownget {
% Stack: font Private SubrCount
currentglobal 3 1 roll 1 index gcheck setglobal
array 1 index /Subrs 3 -1 roll put
% Stack: font global Private
2 index begin begin .loadsubrs end end
setglobal
} {
pop
} ifelse readonly pop
} {
pop pop
} ifelse
} forall
3 -1 roll setglobal
} bind def
% Read some Subrs for the current Type 1 subfont.
% The subfont's Private dict is currentdict; the CIDFont itself is the
% next dictionary on the stack.
/.readsubrs { % <Subrs> <start> .readsubrs <Subrs>
1 SubrCount 1 sub {
dup SDBytes mul SubrMapOffset add
dup SDBytes .readint exch SDBytes add SDBytes .readint
1 index sub string ReadString 2 index 3 1 roll put
} for
} bind def
% Ensure that all the Subrs for the current Type 1 subfont are loaded.
% The subfont's Private dict is currentdict; the CIDFont itself is the
% next dictionary on the stack.
/.loadsubrs {
Subrs length 0 ne {
SubrCache SubrMapOffset .knownget {
% We've already loaded some Subrs at this offset.
% Make sure we've got as many as we need.
dup length SubrCount lt {
% We need to load more.
SubrCount array exch 1 index copy length .readsubrs
SubrCache SubrMapOffset 2 index put
} if
} {
% We haven't loaded any Subrs at this offset yet.
SubrCount array 0 .readsubrs
SubrCache SubrMapOffset 2 index put
} ifelse
Subrs copy pop
} if
} bind def
% ------ CIDFontType 1 (FontType 10) ------ %
dup 1 {
10 //.checkfonttype exec pop
1 index exch .buildfont10
.currentresourcefile dup type /filetype eq { //.filename {1 index gcheck //.gcompatstringcopy exec 1 index exch /ResourcePath exch put} if }{ pop} ifelse
exch pop
} put % Don't bind it here because gs_fapi.ps redefines .buildfont10
% ------ CIDFontType 2 (FontType 11) ------ %
dup 2 {
11 //.checkfonttype exec pop
1 index exch .buildfont11
.currentresourcefile dup type /filetype eq { //.filename {1 index gcheck //.gcompatstringcopy exec 1 index exch /ResourcePath exch put} if }{ pop} ifelse
exch pop
} put % Don't bind it here because gs_fapi.ps redefines .buildfont11
currentdict /.gcompatstringcopy .undef
pop % .cidfonttypes
% ---------------- Reading CIDFontType 0 files ---------------- %
/StartData { % <(Binary)|(Hex)> <datalength> StartData -
% (currentdict is CID font dict)
% If we're loading a resource file and the data format is
% binary, we can just save a pointer to the data and load it
% incrementally.
mark {
% Previous versions of this code made provisions for
% reading hex-encoded data incrementally. Since hex data
% doesn't seem to be used in practice, we no longer bother.
2 index (Binary) ne { stop } if
currentfile .currentresourcefile ne { stop } if
% Hack: the pdfwrite driver relies on finalization to write
% out fonts. However, the font may be finalized after the
% resource file, in which case the resource file will be
% closed. So if the current output device is pdfwrite,
% don't use incremental loading.
/AllowIncrementalCFF /GetDeviceParam .special_op {
exch pop {stop}if
}if
currentfile fileposition
} //.internalstopped exec {
% File is not positionable, or uses hex data.
% Load the data now.
cleartomark exch
currentfile exch
(Hex) eq { /ASCIIHexDecode filter } if
exch
% Stack: file length
dup 65400 le {
% readstring with a 0-length string causes a rangecheck,
% but a data length of 0 is allowed.
string dup () ne { 1 index exch readstring pop } if
} {
mark 3 1 roll {
% Stack: mark str ... file length
dup 0 eq { pop exit } if
dup 65400 .min dup string 3 index exch readstring pop
% Stack: mark str ... file length newstrlen newstr
4 1 roll sub
} loop
counttomark 1 add 1 roll ]
} ifelse
/GlyphData exch def
dup currentfile eq { pop } { closefile } ifelse
} {
% File is positionable and binary, just save a pointer.
% Stack: (Binary) length -mark- pos
/GlyphData 0 def
exch pop 3 -1 roll pop exch
% Stack: pos length
/DataSource currentfile 2 index () .subfiledecode //true .reusablestream def
currentfile 3 1 roll add setfileposition
} ifelse
/SubrCache 10 dict def
CIDFontName currentdict /CIDFont defineresource pop
end % CID font dict
end % resource category dict
} bind def
% Some Adobe fonts include the line
% /Setup /cid_Setup load def
% This is apparently included only to prevent proper, conforming PostScript
% interpreters (as opposed to ATM or a special Adobe font loader) from
% loading the font, since Setup is not referenced anywhere else in the file.
/cid_Setup { } def
% ------ Generic ------ %
% Read a string at a given offset in a "file" (binary file or
% GlyphData in RAM).
/ReadString { % <pos> <string> ReadString <string>
GlyphData 0 eq {
% Read from the file.
DataSource 3 -1 roll setfileposition
DataSource exch readstring pop
} {
% Read from a string or an array of strings.
GlyphData .stringsreadstring
} ifelse
} bind def
/.stringsreadstring % <pos> <string> <strings> .stringsreadstring
% <vmstring>
{ dup type /stringtype eq
{ 3 1 roll length getinterval
}
{ { % Stack: pos string glyphdata
dup 0 get length dup 4 index gt { exit } if
4 -1 roll exch sub 3 1 roll
dup length 1 sub 1 exch getinterval
}
loop
% Stack: pos string glyphdata glyphdata[0]length
% We know no request can span more than 2 strings.
3 index 3 index length add 1 index le
{ % Request fits in a single string: just return a substring.
pop 0 get 3 1 roll length getinterval
}
{ % Request spans 2 strings. Copy the first part.
1 index 0 get 4 index 3 -1 roll 1 index sub getinterval
2 index copy
% Copy the second part.
% Stack: pos str glyphdata str1
length exch 1 get 0 3 index length
3 index sub getinterval 2 index 3 1 roll putinterval
exch pop
}
ifelse
}
ifelse
} bind def
% Interpret a byte string as a (big-endian) integer.
/.cvbsi % <bytes> .cvbsi <int>
{ 0 exch { exch 8 bitshift add } forall
} bind def
% Read an integer from binary data.
/.readint % <pos> <nbytes> .readint <int>
{ string ReadString .cvbsi
} bind def
currentdict end
% ---------------- Rendering ---------------- %
% ------ CIDFontType 0 ------ %
/.readglyphdata {
currentfont exch .type9mapcid
FDArray exch get exch
} bind executeonly def
% BuildGlyph procedure for CIDFontType 0.
% The name %Type9BuildGlyph is known to the interpreter.
/.cid0buildstring 10 string def
(%Type9BuildGlyph) cvn { % <cidfont> <cid> %Type9BuildGlyph -
.currentglobal 3 1 roll 1 index gcheck .setglobal
1 index begin
dup //.readglyphdata exec dup //null eq {
% Substitute CID 0. **** WRONG ****
pop pop 0 //.readglyphdata exec
} if
% Stack: cidfont cid subfont charstring
dup //null eq { pop pop pop pop } { %**** WRONG ****
4 -1 roll pop
3 1 roll exch dup 4 -1 roll 0 0 moveto
3 index /FontType get 2 eq { .type2execchar } { .type1execchar } ifelse
} ifelse %**** WRONG ****
end
.setglobal
} bind executeonly def
% ------ CIDFontType 2 ------ %
% BuildGlyph procedure for CIDFontType 2.
% The name %Type11BuildGlyph is known to the interpreter.
(%Type11BuildGlyph) cvn { % <cidfont> <cid> %Type11BuildGlyph -
% We must be prepared for out-of-range CIDs.
2 copy { .type11mapcid } //.internalstopped exec {
pop /CharStrings get /.notdef get
} if
% Stack: cidfont cid glyphindex
1 index exch .type42execchar
} bind executeonly def
% ---------------- Define resources ---------------- %
languagelevel exch 2 .setlanguagelevel
% Define the CIDInit ProcSet resource.
% The ProcSet dictionary is still on the stack.
% We might have loaded CMap support already. However, Adobe's
% protected font downloader defines a CIDInit ProcSet that will be
% loaded from the filesystem later, so we must check specifically
% for the ProcSet being defined in VM.
/CIDInit /ProcSet 2 copy resourcestatus { pop 0 eq } { //false } ifelse {
pop pop findresource dup length 4 index length add dict .copydict
4 -1 roll exch .copydict
} {
3 -1 roll
} ifelse exch defineresource pop
% Define the CIDFont resource category.
% We break out .buildcidfont because it appears that at least for
% Type 32 (CIDFontType 4) fonts, the font can be registered in the Font
% category with only a CIDFontType and no FontType.
/.buildcidfont { % <name> <fontdict> .buildcidfont
% <name> <cidfont>
systemdict /ProvideUnicode .knownget not { //false } if {
/FontEmulationProcs /ProcSet findresource
/ProvideUnicodeDecoding get exec
} if
dup /CIDFontType get //.cidfonttypes exch get exec
} bind executeonly odef
/CIDFont /Generic /Category findresource dup length dict .copydict
dup /InstanceType /dicttype put
dup /DefineResource {
dup /OrigFont known not {
dup dup /OrigFont exch .growput % CPSI does it. Adding just for CET 33_all.PS conformity.
} if
dup /PaintType known not {
dup /PaintType 0 .growput % CPSI does it. Adding just for CET 33_all.PS conformity.
} if
.buildcidfont
/Generic /Category findresource /DefineResource get exec
} put
% CIDFonts may be defined in CFF OpenType files.
% Check for this here.
/.loadcidfontresource {
dup .ResourceFile {
{.loadfont} .execasresource
} {
dup /undefinedresource signalerror
} ifelse
} bind def
dup /.LoadResource {
currentglobal {
//.loadcidfontresource exec
} {
//true setglobal {//.loadcidfontresource exec} stopped //false setglobal {stop} if
} ifelse
} bind put
/Category defineresource pop
% Add the new FontType resources.
9 1 11 { dup /FontType defineresource pop } for
% Add the new FMapType resource.
9 dup /FMapType defineresource pop
% Define the CIDMap resource category.
% These aren't documented, but it's clear what they are for:
% to give names to CIDMaps for CIDFontType 2 fonts.
/CIDMap /Generic /Category findresource dup length dict .copydict
dup /.CheckResource {
% Allow a string, an array of strings, or (as of Adobe release 3011)
% a dictionary.
dup type dup dup /stringtype eq exch /dicttype eq or {
pop //true
} {
dup /arraytype eq exch /packedarraytype eq or {
//true exch { type /stringtype eq and } forall
} {
//false
} ifelse
} ifelse
} bind put
/Category defineresource pop
.setlanguagelevel
%% Replace 1 (gs_ciddc.ps)
(gs_ciddc.ps) runlibfile
% Undef these, not needed outside this file
[
/.checkfonttype
/.loadcidfontresource
/.readglyphdata
] {systemdict exch .forceundef} forall
Mini Shell