Current File : //proc/thread-self/root/proc/self/root/opt/cpanel/ea-apr16/include/apr-1/apr_poll.h
/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef APR_POLL_H
#define APR_POLL_H
/**
* @file apr_poll.h
* @brief APR Poll interface
*/
#include "apr.h"
#include "apr_pools.h"
#include "apr_errno.h"
#include "apr_inherit.h"
#include "apr_file_io.h"
#include "apr_network_io.h"
#if APR_HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/**
* @defgroup apr_poll Poll Routines
* @ingroup APR
* @{
*/
/**
* @defgroup pollopts Poll options
* @ingroup apr_poll
* @{
*/
#define APR_POLLIN 0x001 /**< Can read without blocking */
#define APR_POLLPRI 0x002 /**< Priority data available */
#define APR_POLLOUT 0x004 /**< Can write without blocking */
#define APR_POLLERR 0x010 /**< Pending error */
#define APR_POLLHUP 0x020 /**< Hangup occurred */
#define APR_POLLNVAL 0x040 /**< Descriptor invalid */
/** @} */
/**
* @defgroup pollflags Pollset Flags
* @ingroup apr_poll
* @{
*/
#define APR_POLLSET_THREADSAFE 0x001 /**< Adding or removing a descriptor is
* thread-safe
*/
#define APR_POLLSET_NOCOPY 0x002 /**< Descriptors passed to apr_pollset_add()
* are not copied
*/
#define APR_POLLSET_WAKEABLE 0x004 /**< Poll operations are interruptable by
* apr_pollset_wakeup() or apr_pollcb_wakeup()
*/
#define APR_POLLSET_NODEFAULT 0x010 /**< Do not try to use the default method if
* the specified non-default method cannot be
* used
*/
/** @} */
/**
* Pollset Methods
*/
typedef enum {
APR_POLLSET_DEFAULT, /**< Platform default poll method */
APR_POLLSET_SELECT, /**< Poll uses select method */
APR_POLLSET_KQUEUE, /**< Poll uses kqueue method */
APR_POLLSET_PORT, /**< Poll uses Solaris event port method */
APR_POLLSET_EPOLL, /**< Poll uses epoll method */
APR_POLLSET_POLL, /**< Poll uses poll method */
APR_POLLSET_AIO_MSGQ /**< Poll uses z/OS asio method */
} apr_pollset_method_e;
/** Used in apr_pollfd_t to determine what the apr_descriptor is */
typedef enum {
APR_NO_DESC, /**< nothing here */
APR_POLL_SOCKET, /**< descriptor refers to a socket */
APR_POLL_FILE, /**< descriptor refers to a file */
APR_POLL_LASTDESC /**< @deprecated descriptor is the last one in the list */
} apr_datatype_e ;
/** Union of either an APR file or socket. */
typedef union {
apr_file_t *f; /**< file */
apr_socket_t *s; /**< socket */
} apr_descriptor;
/** @see apr_pollfd_t */
typedef struct apr_pollfd_t apr_pollfd_t;
/** Poll descriptor set. */
struct apr_pollfd_t {
apr_pool_t *p; /**< associated pool */
apr_datatype_e desc_type; /**< descriptor type */
apr_int16_t reqevents; /**< requested events */
apr_int16_t rtnevents; /**< returned events */
apr_descriptor desc; /**< @see apr_descriptor */
void *client_data; /**< allows app to associate context */
};
/* General-purpose poll API for arbitrarily large numbers of
* file descriptors
*/
/** Opaque structure used for pollset API */
typedef struct apr_pollset_t apr_pollset_t;
/**
* Set up a pollset object
* @param pollset The pointer in which to return the newly created object
* @param size The maximum number of descriptors that this pollset can hold
* @param p The pool from which to allocate the pollset
* @param flags Optional flags to modify the operation of the pollset.
*
* @remark If flags contains APR_POLLSET_THREADSAFE, then a pollset is
* created on which it is safe to make concurrent calls to
* apr_pollset_add(), apr_pollset_remove() and apr_pollset_poll()
* from separate threads. This feature is only supported on some
* platforms; the apr_pollset_create() call will fail with
* APR_ENOTIMPL on platforms where it is not supported.
* @remark If flags contains APR_POLLSET_WAKEABLE, then a pollset is
* created with an additional internal pipe object used for the
* apr_pollset_wakeup() call. The actual size of pollset is
* in that case @a size + 1. This feature is only supported on some
* platforms; the apr_pollset_create() call will fail with
* APR_ENOTIMPL on platforms where it is not supported.
* @remark If flags contains APR_POLLSET_NOCOPY, then the apr_pollfd_t
* structures passed to apr_pollset_add() are not copied and
* must have a lifetime at least as long as the pollset.
* @remark Some poll methods (including APR_POLLSET_KQUEUE,
* APR_POLLSET_PORT, and APR_POLLSET_EPOLL) do not have a
* fixed limit on the size of the pollset. For these methods,
* the size parameter controls the maximum number of
* descriptors that will be returned by a single call to
* apr_pollset_poll().
*/
APR_DECLARE(apr_status_t) apr_pollset_create(apr_pollset_t **pollset,
apr_uint32_t size,
apr_pool_t *p,
apr_uint32_t flags);
/**
* Set up a pollset object
* @param pollset The pointer in which to return the newly created object
* @param size The maximum number of descriptors that this pollset can hold
* @param p The pool from which to allocate the pollset
* @param flags Optional flags to modify the operation of the pollset.
* @param method Poll method to use. See #apr_pollset_method_e. If this
* method cannot be used, the default method will be used unless the
* APR_POLLSET_NODEFAULT flag has been specified.
*
* @remark If flags contains APR_POLLSET_THREADSAFE, then a pollset is
* created on which it is safe to make concurrent calls to
* apr_pollset_add(), apr_pollset_remove() and apr_pollset_poll()
* from separate threads. This feature is only supported on some
* platforms; the apr_pollset_create_ex() call will fail with
* APR_ENOTIMPL on platforms where it is not supported.
* @remark If flags contains APR_POLLSET_WAKEABLE, then a pollset is
* created with additional internal pipe object used for the
* apr_pollset_wakeup() call. The actual size of pollset is
* in that case size + 1. This feature is only supported on some
* platforms; the apr_pollset_create_ex() call will fail with
* APR_ENOTIMPL on platforms where it is not supported.
* @remark If flags contains APR_POLLSET_NOCOPY, then the apr_pollfd_t
* structures passed to apr_pollset_add() are not copied and
* must have a lifetime at least as long as the pollset.
* @remark Some poll methods (including APR_POLLSET_KQUEUE,
* APR_POLLSET_PORT, and APR_POLLSET_EPOLL) do not have a
* fixed limit on the size of the pollset. For these methods,
* the size parameter controls the maximum number of
* descriptors that will be returned by a single call to
* apr_pollset_poll().
*/
APR_DECLARE(apr_status_t) apr_pollset_create_ex(apr_pollset_t **pollset,
apr_uint32_t size,
apr_pool_t *p,
apr_uint32_t flags,
apr_pollset_method_e method);
/**
* Destroy a pollset object
* @param pollset The pollset to destroy
*/
APR_DECLARE(apr_status_t) apr_pollset_destroy(apr_pollset_t *pollset);
/**
* Add a socket or file descriptor to a pollset
* @param pollset The pollset to which to add the descriptor
* @param descriptor The descriptor to add
* @remark If you set client_data in the descriptor, that value
* will be returned in the client_data field whenever this
* descriptor is signalled in apr_pollset_poll().
* @remark If the pollset has been created with APR_POLLSET_THREADSAFE
* and thread T1 is blocked in a call to apr_pollset_poll() for
* this same pollset that is being modified via apr_pollset_add()
* in thread T2, the currently executing apr_pollset_poll() call in
* T1 will either: (1) automatically include the newly added descriptor
* in the set of descriptors it is watching or (2) return immediately
* with APR_EINTR. Option (1) is recommended, but option (2) is
* allowed for implementations where option (1) is impossible
* or impractical.
* @remark If the pollset has been created with APR_POLLSET_NOCOPY, the
* apr_pollfd_t structure referenced by descriptor will not be copied
* and must have a lifetime at least as long as the pollset.
* @remark Do not add the same socket or file descriptor to the same pollset
* multiple times, even if the requested events differ for the
* different calls to apr_pollset_add(). If the events of interest
* for a descriptor change, you must first remove the descriptor
* from the pollset with apr_pollset_remove(), then add it again
* specifying all requested events.
*/
APR_DECLARE(apr_status_t) apr_pollset_add(apr_pollset_t *pollset,
const apr_pollfd_t *descriptor);
/**
* Remove a descriptor from a pollset
* @param pollset The pollset from which to remove the descriptor
* @param descriptor The descriptor to remove
* @remark If the descriptor is not found, APR_NOTFOUND is returned.
* @remark If the pollset has been created with APR_POLLSET_THREADSAFE
* and thread T1 is blocked in a call to apr_pollset_poll() for
* this same pollset that is being modified via apr_pollset_remove()
* in thread T2, the currently executing apr_pollset_poll() call in
* T1 will either: (1) automatically exclude the newly added descriptor
* in the set of descriptors it is watching or (2) return immediately
* with APR_EINTR. Option (1) is recommended, but option (2) is
* allowed for implementations where option (1) is impossible
* or impractical.
* @remark apr_pollset_remove() cannot be used to remove a subset of requested
* events for a descriptor. The reqevents field in the apr_pollfd_t
* parameter must contain the same value when removing as when adding.
*/
APR_DECLARE(apr_status_t) apr_pollset_remove(apr_pollset_t *pollset,
const apr_pollfd_t *descriptor);
/**
* Block for activity on the descriptor(s) in a pollset
* @param pollset The pollset to use
* @param timeout The amount of time in microseconds to wait. This is a
* maximum, not a minimum. If a descriptor is signalled, the
* function will return before this time. If timeout is
* negative, the function will block until a descriptor is
* signalled or until apr_pollset_wakeup() has been called.
* @param num Number of signalled descriptors (output parameter)
* @param descriptors Array of signalled descriptors (output parameter)
* @remark APR_EINTR will be returned if the pollset has been created with
* APR_POLLSET_WAKEABLE, apr_pollset_wakeup() has been called while
* waiting for activity, and there were no signalled descriptors at the
* time of the wakeup call.
* @remark Multiple signalled conditions for the same descriptor may be reported
* in one or more returned apr_pollfd_t structures, depending on the
* implementation.
*/
APR_DECLARE(apr_status_t) apr_pollset_poll(apr_pollset_t *pollset,
apr_interval_time_t timeout,
apr_int32_t *num,
const apr_pollfd_t **descriptors);
/**
* Interrupt the blocked apr_pollset_poll() call.
* @param pollset The pollset to use
* @remark If the pollset was not created with APR_POLLSET_WAKEABLE the
* return value is APR_EINIT.
*/
APR_DECLARE(apr_status_t) apr_pollset_wakeup(apr_pollset_t *pollset);
/**
* Poll the descriptors in the poll structure
* @param aprset The poll structure we will be using.
* @param numsock The number of descriptors we are polling
* @param nsds The number of descriptors signalled (output parameter)
* @param timeout The amount of time in microseconds to wait. This is a
* maximum, not a minimum. If a descriptor is signalled, the
* function will return before this time. If timeout is
* negative, the function will block until a descriptor is
* signalled or until apr_pollset_wakeup() has been called.
* @remark The number of descriptors signalled is returned in the third argument.
* This is a blocking call, and it will not return until either a
* descriptor has been signalled or the timeout has expired.
* @remark The rtnevents field in the apr_pollfd_t array will only be filled-
* in if the return value is APR_SUCCESS.
*/
APR_DECLARE(apr_status_t) apr_poll(apr_pollfd_t *aprset, apr_int32_t numsock,
apr_int32_t *nsds,
apr_interval_time_t timeout);
/**
* Return a printable representation of the pollset method.
* @param pollset The pollset to use
*/
APR_DECLARE(const char *) apr_pollset_method_name(apr_pollset_t *pollset);
/**
* Return a printable representation of the default pollset method
* (APR_POLLSET_DEFAULT).
*/
APR_DECLARE(const char *) apr_poll_method_defname(void);
/** Opaque structure used for pollcb API */
typedef struct apr_pollcb_t apr_pollcb_t;
/**
* Set up a pollcb object
* @param pollcb The pointer in which to return the newly created object
* @param size The maximum number of descriptors that a single _poll can return.
* @param p The pool from which to allocate the pollcb
* @param flags Optional flags to modify the operation of the pollcb.
*
* @remark If flags contains APR_POLLSET_WAKEABLE, then a pollcb is
* created with an additional internal pipe object used for the
* apr_pollcb_wakeup() call. The actual size of pollcb is
* in that case @a size + 1.
* @remark Pollcb is only supported on some platforms; the apr_pollcb_create()
* call will fail with APR_ENOTIMPL on platforms where it is not supported.
*/
APR_DECLARE(apr_status_t) apr_pollcb_create(apr_pollcb_t **pollcb,
apr_uint32_t size,
apr_pool_t *p,
apr_uint32_t flags);
/**
* Set up a pollcb object
* @param pollcb The pointer in which to return the newly created object
* @param size The maximum number of descriptors that a single _poll can return.
* @param p The pool from which to allocate the pollcb
* @param flags Optional flags to modify the operation of the pollcb.
* @param method Poll method to use. See #apr_pollset_method_e. If this
* method cannot be used, the default method will be used unless the
* APR_POLLSET_NODEFAULT flag has been specified.
*
* @remark If flags contains APR_POLLSET_WAKEABLE, then a pollcb is
* created with an additional internal pipe object used for the
* apr_pollcb_wakeup() call. The actual size of pollcb is
* in that case @a size + 1.
* @remark Pollcb is only supported on some platforms; the apr_pollcb_create_ex()
* call will fail with APR_ENOTIMPL on platforms where it is not supported.
*/
APR_DECLARE(apr_status_t) apr_pollcb_create_ex(apr_pollcb_t **pollcb,
apr_uint32_t size,
apr_pool_t *p,
apr_uint32_t flags,
apr_pollset_method_e method);
/**
* Add a socket or file descriptor to a pollcb
* @param pollcb The pollcb to which to add the descriptor
* @param descriptor The descriptor to add
* @remark If you set client_data in the descriptor, that value will be
* returned in the client_data field whenever this descriptor is
* signalled in apr_pollcb_poll().
* @remark Unlike the apr_pollset API, the descriptor is not copied, and users
* must retain the memory used by descriptor, as the same pointer will
* be returned to them from apr_pollcb_poll.
* @remark Do not add the same socket or file descriptor to the same pollcb
* multiple times, even if the requested events differ for the
* different calls to apr_pollcb_add(). If the events of interest
* for a descriptor change, you must first remove the descriptor
* from the pollcb with apr_pollcb_remove(), then add it again
* specifying all requested events.
*/
APR_DECLARE(apr_status_t) apr_pollcb_add(apr_pollcb_t *pollcb,
apr_pollfd_t *descriptor);
/**
* Remove a descriptor from a pollcb
* @param pollcb The pollcb from which to remove the descriptor
* @param descriptor The descriptor to remove
* @remark If the descriptor is not found, APR_NOTFOUND is returned.
* @remark apr_pollcb_remove() cannot be used to remove a subset of requested
* events for a descriptor. The reqevents field in the apr_pollfd_t
* parameter must contain the same value when removing as when adding.
*/
APR_DECLARE(apr_status_t) apr_pollcb_remove(apr_pollcb_t *pollcb,
apr_pollfd_t *descriptor);
/**
* Function prototype for pollcb handlers
* @param baton Opaque baton passed into apr_pollcb_poll()
* @param descriptor Contains the notification for an active descriptor.
* The @a rtnevents member describes which events were triggered
* for this descriptor.
* @remark If the pollcb handler does not return APR_SUCCESS, the apr_pollcb_poll()
* call returns with the handler's return value.
*/
typedef apr_status_t (*apr_pollcb_cb_t)(void *baton, apr_pollfd_t *descriptor);
/**
* Block for activity on the descriptor(s) in a pollcb
* @param pollcb The pollcb to use
* @param timeout The amount of time in microseconds to wait. This is a
* maximum, not a minimum. If a descriptor is signalled, the
* function will return before this time. If timeout is
* negative, the function will block until a descriptor is
* signalled or until apr_pollcb_wakeup() has been called.
* @param func Callback function to call for each active descriptor.
* @param baton Opaque baton passed to the callback function.
* @remark Multiple signalled conditions for the same descriptor may be reported
* in one or more calls to the callback function, depending on the
* implementation.
* @remark APR_EINTR will be returned if the pollset has been created with
* APR_POLLSET_WAKEABLE and apr_pollcb_wakeup() has been called while
* waiting for activity.
*/
APR_DECLARE(apr_status_t) apr_pollcb_poll(apr_pollcb_t *pollcb,
apr_interval_time_t timeout,
apr_pollcb_cb_t func,
void *baton);
/**
* Interrupt the blocked apr_pollcb_poll() call.
* @param pollcb The pollcb to use
* @remark If the pollcb was not created with APR_POLLSET_WAKEABLE the
* return value is APR_EINIT.
*/
APR_DECLARE(apr_status_t) apr_pollcb_wakeup(apr_pollcb_t *pollcb);
/**
* Return a printable representation of the pollcb method.
* @param pollcb The pollcb to use
*/
APR_DECLARE(const char *) apr_pollcb_method_name(apr_pollcb_t *pollcb);
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* ! APR_POLL_H */
Mini Shell