Current File : //proc/thread-self/root/proc/self/root/proc/thread-self/root/lib64/perl5/vendor_perl/DB_File.pm
# DB_File.pm -- Perl 5 interface to Berkeley DB
#
# Written by Paul Marquess (pmqs@cpan.org)
#
# Copyright (c) 1995-2018 Paul Marquess. All rights reserved.
# This program is free software; you can redistribute it and/or
# modify it under the same terms as Perl itself.
package DB_File::HASHINFO ;
require 5.008003;
use warnings;
use strict;
use Carp;
require Tie::Hash;
@DB_File::HASHINFO::ISA = qw(Tie::Hash);
sub new
{
my $pkg = shift ;
my %x ;
tie %x, $pkg ;
bless \%x, $pkg ;
}
sub TIEHASH
{
my $pkg = shift ;
bless { VALID => {
bsize => 1,
ffactor => 1,
nelem => 1,
cachesize => 1,
hash => 2,
lorder => 1,
},
GOT => {}
}, $pkg ;
}
sub FETCH
{
my $self = shift ;
my $key = shift ;
return $self->{GOT}{$key} if exists $self->{VALID}{$key} ;
my $pkg = ref $self ;
croak "${pkg}::FETCH - Unknown element '$key'" ;
}
sub STORE
{
my $self = shift ;
my $key = shift ;
my $value = shift ;
my $type = $self->{VALID}{$key};
if ( $type )
{
croak "Key '$key' not associated with a code reference"
if $type == 2 && !ref $value && ref $value ne 'CODE';
$self->{GOT}{$key} = $value ;
return ;
}
my $pkg = ref $self ;
croak "${pkg}::STORE - Unknown element '$key'" ;
}
sub DELETE
{
my $self = shift ;
my $key = shift ;
if ( exists $self->{VALID}{$key} )
{
delete $self->{GOT}{$key} ;
return ;
}
my $pkg = ref $self ;
croak "DB_File::HASHINFO::DELETE - Unknown element '$key'" ;
}
sub EXISTS
{
my $self = shift ;
my $key = shift ;
exists $self->{VALID}{$key} ;
}
sub NotHere
{
my $self = shift ;
my $method = shift ;
croak ref($self) . " does not define the method ${method}" ;
}
sub FIRSTKEY { my $self = shift ; $self->NotHere("FIRSTKEY") }
sub NEXTKEY { my $self = shift ; $self->NotHere("NEXTKEY") }
sub CLEAR { my $self = shift ; $self->NotHere("CLEAR") }
package DB_File::RECNOINFO ;
use warnings;
use strict ;
@DB_File::RECNOINFO::ISA = qw(DB_File::HASHINFO) ;
sub TIEHASH
{
my $pkg = shift ;
bless { VALID => { map {$_, 1}
qw( bval cachesize psize flags lorder reclen bfname )
},
GOT => {},
}, $pkg ;
}
package DB_File::BTREEINFO ;
use warnings;
use strict ;
@DB_File::BTREEINFO::ISA = qw(DB_File::HASHINFO) ;
sub TIEHASH
{
my $pkg = shift ;
bless { VALID => {
flags => 1,
cachesize => 1,
maxkeypage => 1,
minkeypage => 1,
psize => 1,
compare => 2,
prefix => 2,
lorder => 1,
},
GOT => {},
}, $pkg ;
}
package DB_File ;
use warnings;
use strict;
our ($VERSION, @ISA, @EXPORT, $AUTOLOAD, $DB_BTREE, $DB_HASH, $DB_RECNO);
our ($db_version, $use_XSLoader, $splice_end_array_no_length, $splice_end_array, $Error);
use Carp;
# Module not thread safe, so don't clone
sub CLONE_SKIP { 1 }
$VERSION = "1.842" ;
$VERSION = eval $VERSION; # needed for dev releases
{
local $SIG{__WARN__} = sub {$splice_end_array_no_length = join(" ",@_);};
my @a =(1); splice(@a, 3);
$splice_end_array_no_length =
($splice_end_array_no_length =~ /^splice\(\) offset past end of array at /);
}
{
local $SIG{__WARN__} = sub {$splice_end_array = join(" ", @_);};
my @a =(1); splice(@a, 3, 1);
$splice_end_array =
($splice_end_array =~ /^splice\(\) offset past end of array at /);
}
#typedef enum { DB_BTREE, DB_HASH, DB_RECNO } DBTYPE;
$DB_BTREE = new DB_File::BTREEINFO ;
$DB_HASH = new DB_File::HASHINFO ;
$DB_RECNO = new DB_File::RECNOINFO ;
require Tie::Hash;
require Exporter;
BEGIN {
$use_XSLoader = 1 ;
{ local $SIG{__DIE__} ; eval { require XSLoader } ; }
if ($@) {
$use_XSLoader = 0 ;
require DynaLoader;
@ISA = qw(DynaLoader);
}
}
push @ISA, qw(Tie::Hash Exporter);
@EXPORT = qw(
$DB_BTREE $DB_HASH $DB_RECNO
BTREEMAGIC
BTREEVERSION
DB_LOCK
DB_SHMEM
DB_TXN
HASHMAGIC
HASHVERSION
MAX_PAGE_NUMBER
MAX_PAGE_OFFSET
MAX_REC_NUMBER
RET_ERROR
RET_SPECIAL
RET_SUCCESS
R_CURSOR
R_DUP
R_FIRST
R_FIXEDLEN
R_IAFTER
R_IBEFORE
R_LAST
R_NEXT
R_NOKEY
R_NOOVERWRITE
R_PREV
R_RECNOSYNC
R_SETCURSOR
R_SNAPSHOT
__R_UNUSED
);
sub AUTOLOAD {
my($constname);
($constname = $AUTOLOAD) =~ s/.*:://;
my ($error, $val) = constant($constname);
Carp::croak $error if $error;
no strict 'refs';
*{$AUTOLOAD} = sub { $val };
goto &{$AUTOLOAD};
}
eval {
# Make all Fcntl O_XXX constants available for importing
require Fcntl;
my @O = grep /^O_/, @Fcntl::EXPORT;
Fcntl->import(@O); # first we import what we want to export
push(@EXPORT, @O);
};
if ($use_XSLoader)
{ XSLoader::load("DB_File", $VERSION)}
else
{ bootstrap DB_File $VERSION }
sub tie_hash_or_array
{
my (@arg) = @_ ;
my $tieHASH = ( (caller(1))[3] =~ /TIEHASH/ ) ;
use File::Spec;
$arg[1] = File::Spec->rel2abs($arg[1])
if defined $arg[1] ;
$arg[4] = tied %{ $arg[4] }
if @arg >= 5 && ref $arg[4] && $arg[4] =~ /=HASH/ && tied %{ $arg[4] } ;
$arg[2] = O_CREAT()|O_RDWR() if @arg >=3 && ! defined $arg[2];
$arg[3] = 0666 if @arg >=4 && ! defined $arg[3];
# make recno in Berkeley DB version 2 (or better) work like
# recno in version 1.
if ($db_version >= 4 and ! $tieHASH) {
$arg[2] |= O_CREAT();
}
if ($db_version > 1 and defined $arg[4] and $arg[4] =~ /RECNO/ and
$arg[1] and ! -e $arg[1]) {
open(FH, ">$arg[1]") or return undef ;
close FH ;
chmod $arg[3] ? $arg[3] : 0666 , $arg[1] ;
}
DoTie_($tieHASH, @arg) ;
}
sub TIEHASH
{
tie_hash_or_array(@_) ;
}
sub TIEARRAY
{
tie_hash_or_array(@_) ;
}
sub CLEAR
{
my $self = shift;
my $key = 0 ;
my $value = "" ;
my $status = $self->seq($key, $value, R_FIRST());
my @keys;
while ($status == 0) {
push @keys, $key;
$status = $self->seq($key, $value, R_NEXT());
}
foreach $key (reverse @keys) {
my $s = $self->del($key);
}
}
sub EXTEND { }
sub STORESIZE
{
my $self = shift;
my $length = shift ;
my $current_length = $self->length() ;
if ($length < $current_length) {
my $key ;
for ($key = $current_length - 1 ; $key >= $length ; -- $key)
{ $self->del($key) }
}
elsif ($length > $current_length) {
$self->put($length-1, "") ;
}
}
sub SPLICE
{
my $self = shift;
my $offset = shift;
if (not defined $offset) {
warnings::warnif('uninitialized', 'Use of uninitialized value in splice');
$offset = 0;
}
my $has_length = @_;
my $length = @_ ? shift : 0;
# Carping about definedness comes _after_ the OFFSET sanity check.
# This is so we get the same error messages as Perl's splice().
#
my @list = @_;
my $size = $self->FETCHSIZE();
# 'If OFFSET is negative then it start that far from the end of
# the array.'
#
if ($offset < 0) {
my $new_offset = $size + $offset;
if ($new_offset < 0) {
die "Modification of non-creatable array value attempted, "
. "subscript $offset";
}
$offset = $new_offset;
}
if (not defined $length) {
warnings::warnif('uninitialized', 'Use of uninitialized value in splice');
$length = 0;
}
if ($offset > $size) {
$offset = $size;
warnings::warnif('misc', 'splice() offset past end of array')
if $has_length ? $splice_end_array : $splice_end_array_no_length;
}
# 'If LENGTH is omitted, removes everything from OFFSET onward.'
if (not defined $length) {
$length = $size - $offset;
}
# 'If LENGTH is negative, leave that many elements off the end of
# the array.'
#
if ($length < 0) {
$length = $size - $offset + $length;
if ($length < 0) {
# The user must have specified a length bigger than the
# length of the array passed in. But perl's splice()
# doesn't catch this, it just behaves as for length=0.
#
$length = 0;
}
}
if ($length > $size - $offset) {
$length = $size - $offset;
}
# $num_elems holds the current number of elements in the database.
my $num_elems = $size;
# 'Removes the elements designated by OFFSET and LENGTH from an
# array,'...
#
my @removed = ();
foreach (0 .. $length - 1) {
my $old;
my $status = $self->get($offset, $old);
if ($status != 0) {
my $msg = "error from Berkeley DB on get($offset, \$old)";
if ($status == 1) {
$msg .= ' (no such element?)';
}
else {
$msg .= ": error status $status";
if (defined $! and $! ne '') {
$msg .= ", message $!";
}
}
die $msg;
}
push @removed, $old;
$status = $self->del($offset);
if ($status != 0) {
my $msg = "error from Berkeley DB on del($offset)";
if ($status == 1) {
$msg .= ' (no such element?)';
}
else {
$msg .= ": error status $status";
if (defined $! and $! ne '') {
$msg .= ", message $!";
}
}
die $msg;
}
-- $num_elems;
}
# ...'and replaces them with the elements of LIST, if any.'
my $pos = $offset;
while (defined (my $elem = shift @list)) {
my $old_pos = $pos;
my $status;
if ($pos >= $num_elems) {
$status = $self->put($pos, $elem);
}
else {
$status = $self->put($pos, $elem, $self->R_IBEFORE);
}
if ($status != 0) {
my $msg = "error from Berkeley DB on put($pos, $elem, ...)";
if ($status == 1) {
$msg .= ' (no such element?)';
}
else {
$msg .= ", error status $status";
if (defined $! and $! ne '') {
$msg .= ", message $!";
}
}
die $msg;
}
die "pos unexpectedly changed from $old_pos to $pos with R_IBEFORE"
if $old_pos != $pos;
++ $pos;
++ $num_elems;
}
if (wantarray) {
# 'In list context, returns the elements removed from the
# array.'
#
return @removed;
}
elsif (defined wantarray and not wantarray) {
# 'In scalar context, returns the last element removed, or
# undef if no elements are removed.'
#
if (@removed) {
my $last = pop @removed;
return "$last";
}
else {
return undef;
}
}
elsif (not defined wantarray) {
# Void context
}
else { die }
}
sub ::DB_File::splice { &SPLICE }
sub find_dup
{
croak "Usage: \$db->find_dup(key,value)\n"
unless @_ == 3 ;
my $db = shift ;
my ($origkey, $value_wanted) = @_ ;
my ($key, $value) = ($origkey, 0);
my ($status) = 0 ;
for ($status = $db->seq($key, $value, R_CURSOR() ) ;
$status == 0 ;
$status = $db->seq($key, $value, R_NEXT() ) ) {
return 0 if $key eq $origkey and $value eq $value_wanted ;
}
return $status ;
}
sub del_dup
{
croak "Usage: \$db->del_dup(key,value)\n"
unless @_ == 3 ;
my $db = shift ;
my ($key, $value) = @_ ;
my ($status) = $db->find_dup($key, $value) ;
return $status if $status != 0 ;
$status = $db->del($key, R_CURSOR() ) ;
return $status ;
}
sub get_dup
{
croak "Usage: \$db->get_dup(key [,flag])\n"
unless @_ == 2 or @_ == 3 ;
my $db = shift ;
my $key = shift ;
my $flag = shift ;
my $value = 0 ;
my $origkey = $key ;
my $wantarray = wantarray ;
my %values = () ;
my @values = () ;
my $counter = 0 ;
my $status = 0 ;
# iterate through the database until either EOF ($status == 0)
# or a different key is encountered ($key ne $origkey).
for ($status = $db->seq($key, $value, R_CURSOR()) ;
$status == 0 and $key eq $origkey ;
$status = $db->seq($key, $value, R_NEXT()) ) {
# save the value or count number of matches
if ($wantarray) {
if ($flag)
{ ++ $values{$value} }
else
{ push (@values, $value) }
}
else
{ ++ $counter }
}
return ($wantarray ? ($flag ? %values : @values) : $counter) ;
}
sub STORABLE_freeze
{
my $type = ref shift;
croak "Cannot freeze $type object\n";
}
sub STORABLE_thaw
{
my $type = ref shift;
croak "Cannot thaw $type object\n";
}
1;
__END__
=head1 NAME
DB_File - Perl5 access to Berkeley DB version 1.x
=head1 SYNOPSIS
use DB_File;
[$X =] tie %hash, 'DB_File', [$filename, $flags, $mode, $DB_HASH] ;
[$X =] tie %hash, 'DB_File', $filename, $flags, $mode, $DB_BTREE ;
[$X =] tie @array, 'DB_File', $filename, $flags, $mode, $DB_RECNO ;
$status = $X->del($key [, $flags]) ;
$status = $X->put($key, $value [, $flags]) ;
$status = $X->get($key, $value [, $flags]) ;
$status = $X->seq($key, $value, $flags) ;
$status = $X->sync([$flags]) ;
$status = $X->fd ;
# BTREE only
$count = $X->get_dup($key) ;
@list = $X->get_dup($key) ;
%list = $X->get_dup($key, 1) ;
$status = $X->find_dup($key, $value) ;
$status = $X->del_dup($key, $value) ;
# RECNO only
$a = $X->length;
$a = $X->pop ;
$X->push(list);
$a = $X->shift;
$X->unshift(list);
@r = $X->splice(offset, length, elements);
# DBM Filters
$old_filter = $db->filter_store_key ( sub { ... } ) ;
$old_filter = $db->filter_store_value( sub { ... } ) ;
$old_filter = $db->filter_fetch_key ( sub { ... } ) ;
$old_filter = $db->filter_fetch_value( sub { ... } ) ;
untie %hash ;
untie @array ;
=head1 DESCRIPTION
B<DB_File> is a module which allows Perl programs to make use of the
facilities provided by Berkeley DB version 1.x (if you have a newer
version of DB, see L<Using DB_File with Berkeley DB version 2 or greater>).
It is assumed that you have a copy of the Berkeley DB manual pages at
hand when reading this documentation. The interface defined here
mirrors the Berkeley DB interface closely.
Berkeley DB is a C library which provides a consistent interface to a
number of database formats. B<DB_File> provides an interface to all
three of the database types currently supported by Berkeley DB.
The file types are:
=over 5
=item B<DB_HASH>
This database type allows arbitrary key/value pairs to be stored in data
files. This is equivalent to the functionality provided by other
hashing packages like DBM, NDBM, ODBM, GDBM, and SDBM. Remember though,
the files created using DB_HASH are not compatible with any of the
other packages mentioned.
A default hashing algorithm, which will be adequate for most
applications, is built into Berkeley DB. If you do need to use your own
hashing algorithm it is possible to write your own in Perl and have
B<DB_File> use it instead.
=item B<DB_BTREE>
The btree format allows arbitrary key/value pairs to be stored in a
sorted, balanced binary tree.
As with the DB_HASH format, it is possible to provide a user defined
Perl routine to perform the comparison of keys. By default, though, the
keys are stored in lexical order.
=item B<DB_RECNO>
DB_RECNO allows both fixed-length and variable-length flat text files
to be manipulated using the same key/value pair interface as in DB_HASH
and DB_BTREE. In this case the key will consist of a record (line)
number.
=back
=head2 Using DB_File with Berkeley DB version 2 or greater
Although B<DB_File> is intended to be used with Berkeley DB version 1,
it can also be used with version 2, 3 or 4. In this case the interface is
limited to the functionality provided by Berkeley DB 1.x. Anywhere the
version 2 or greater interface differs, B<DB_File> arranges for it to work
like version 1. This feature allows B<DB_File> scripts that were built
with version 1 to be migrated to version 2 or greater without any changes.
If you want to make use of the new features available in Berkeley DB
2.x or greater, use the Perl module B<BerkeleyDB> instead.
B<Note:> The database file format has changed multiple times in Berkeley
DB version 2, 3 and 4. If you cannot recreate your databases, you
must dump any existing databases with either the C<db_dump> or the
C<db_dump185> utility that comes with Berkeley DB.
Once you have rebuilt DB_File to use Berkeley DB version 2 or greater,
your databases can be recreated using C<db_load>. Refer to the Berkeley DB
documentation for further details.
Please read L<"COPYRIGHT"> before using version 2.x or greater of Berkeley
DB with DB_File.
=head2 Interface to Berkeley DB
B<DB_File> allows access to Berkeley DB files using the tie() mechanism
in Perl 5 (for full details, see L<perlfunc/tie()>). This facility
allows B<DB_File> to access Berkeley DB files using either an
associative array (for DB_HASH & DB_BTREE file types) or an ordinary
array (for the DB_RECNO file type).
In addition to the tie() interface, it is also possible to access most
of the functions provided in the Berkeley DB API directly.
See L<THE API INTERFACE>.
=head2 Opening a Berkeley DB Database File
Berkeley DB uses the function dbopen() to open or create a database.
Here is the C prototype for dbopen():
DB*
dbopen (const char * file, int flags, int mode,
DBTYPE type, const void * openinfo)
The parameter C<type> is an enumeration which specifies which of the 3
interface methods (DB_HASH, DB_BTREE or DB_RECNO) is to be used.
Depending on which of these is actually chosen, the final parameter,
I<openinfo> points to a data structure which allows tailoring of the
specific interface method.
This interface is handled slightly differently in B<DB_File>. Here is
an equivalent call using B<DB_File>:
tie %array, 'DB_File', $filename, $flags, $mode, $DB_HASH ;
The C<filename>, C<flags> and C<mode> parameters are the direct
equivalent of their dbopen() counterparts. The final parameter $DB_HASH
performs the function of both the C<type> and C<openinfo> parameters in
dbopen().
In the example above $DB_HASH is actually a pre-defined reference to a
hash object. B<DB_File> has three of these pre-defined references.
Apart from $DB_HASH, there is also $DB_BTREE and $DB_RECNO.
The keys allowed in each of these pre-defined references is limited to
the names used in the equivalent C structure. So, for example, the
$DB_HASH reference will only allow keys called C<bsize>, C<cachesize>,
C<ffactor>, C<hash>, C<lorder> and C<nelem>.
To change one of these elements, just assign to it like this:
$DB_HASH->{'cachesize'} = 10000 ;
The three predefined variables $DB_HASH, $DB_BTREE and $DB_RECNO are
usually adequate for most applications. If you do need to create extra
instances of these objects, constructors are available for each file
type.
Here are examples of the constructors and the valid options available
for DB_HASH, DB_BTREE and DB_RECNO respectively.
$a = new DB_File::HASHINFO ;
$a->{'bsize'} ;
$a->{'cachesize'} ;
$a->{'ffactor'};
$a->{'hash'} ;
$a->{'lorder'} ;
$a->{'nelem'} ;
$b = new DB_File::BTREEINFO ;
$b->{'flags'} ;
$b->{'cachesize'} ;
$b->{'maxkeypage'} ;
$b->{'minkeypage'} ;
$b->{'psize'} ;
$b->{'compare'} ;
$b->{'prefix'} ;
$b->{'lorder'} ;
$c = new DB_File::RECNOINFO ;
$c->{'bval'} ;
$c->{'cachesize'} ;
$c->{'psize'} ;
$c->{'flags'} ;
$c->{'lorder'} ;
$c->{'reclen'} ;
$c->{'bfname'} ;
The values stored in the hashes above are mostly the direct equivalent
of their C counterpart. Like their C counterparts, all are set to a
default values - that means you don't have to set I<all> of the
values when you only want to change one. Here is an example:
$a = new DB_File::HASHINFO ;
$a->{'cachesize'} = 12345 ;
tie %y, 'DB_File', "filename", $flags, 0777, $a ;
A few of the options need extra discussion here. When used, the C
equivalent of the keys C<hash>, C<compare> and C<prefix> store pointers
to C functions. In B<DB_File> these keys are used to store references
to Perl subs. Below are templates for each of the subs:
sub hash
{
my ($data) = @_ ;
...
# return the hash value for $data
return $hash ;
}
sub compare
{
my ($key, $key2) = @_ ;
...
# return 0 if $key1 eq $key2
# -1 if $key1 lt $key2
# 1 if $key1 gt $key2
return (-1 , 0 or 1) ;
}
sub prefix
{
my ($key, $key2) = @_ ;
...
# return number of bytes of $key2 which are
# necessary to determine that it is greater than $key1
return $bytes ;
}
See L<Changing the BTREE sort order> for an example of using the
C<compare> template.
If you are using the DB_RECNO interface and you intend making use of
C<bval>, you should check out L<The 'bval' Option>.
=head2 Default Parameters
It is possible to omit some or all of the final 4 parameters in the
call to C<tie> and let them take default values. As DB_HASH is the most
common file format used, the call:
tie %A, "DB_File", "filename" ;
is equivalent to:
tie %A, "DB_File", "filename", O_CREAT|O_RDWR, 0666, $DB_HASH ;
It is also possible to omit the filename parameter as well, so the
call:
tie %A, "DB_File" ;
is equivalent to:
tie %A, "DB_File", undef, O_CREAT|O_RDWR, 0666, $DB_HASH ;
See L<In Memory Databases> for a discussion on the use of C<undef>
in place of a filename.
=head2 In Memory Databases
Berkeley DB allows the creation of in-memory databases by using NULL
(that is, a C<(char *)0> in C) in place of the filename. B<DB_File>
uses C<undef> instead of NULL to provide this functionality.
=head1 DB_HASH
The DB_HASH file format is probably the most commonly used of the three
file formats that B<DB_File> supports. It is also very straightforward
to use.
=head2 A Simple Example
This example shows how to create a database, add key/value pairs to the
database, delete keys/value pairs and finally how to enumerate the
contents of the database.
use warnings ;
use strict ;
use DB_File ;
our (%h, $k, $v) ;
unlink "fruit" ;
tie %h, "DB_File", "fruit", O_RDWR|O_CREAT, 0666, $DB_HASH
or die "Cannot open file 'fruit': $!\n";
# Add a few key/value pairs to the file
$h{"apple"} = "red" ;
$h{"orange"} = "orange" ;
$h{"banana"} = "yellow" ;
$h{"tomato"} = "red" ;
# Check for existence of a key
print "Banana Exists\n\n" if $h{"banana"} ;
# Delete a key/value pair.
delete $h{"apple"} ;
# print the contents of the file
while (($k, $v) = each %h)
{ print "$k -> $v\n" }
untie %h ;
here is the output:
Banana Exists
orange -> orange
tomato -> red
banana -> yellow
Note that the like ordinary associative arrays, the order of the keys
retrieved is in an apparently random order.
=head1 DB_BTREE
The DB_BTREE format is useful when you want to store data in a given
order. By default the keys will be stored in lexical order, but as you
will see from the example shown in the next section, it is very easy to
define your own sorting function.
=head2 Changing the BTREE sort order
This script shows how to override the default sorting algorithm that
BTREE uses. Instead of using the normal lexical ordering, a case
insensitive compare function will be used.
use warnings ;
use strict ;
use DB_File ;
my %h ;
sub Compare
{
my ($key1, $key2) = @_ ;
"\L$key1" cmp "\L$key2" ;
}
# specify the Perl sub that will do the comparison
$DB_BTREE->{'compare'} = \&Compare ;
unlink "tree" ;
tie %h, "DB_File", "tree", O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open file 'tree': $!\n" ;
# Add a key/value pair to the file
$h{'Wall'} = 'Larry' ;
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
$h{'duck'} = 'donald' ;
# Delete
delete $h{"duck"} ;
# Cycle through the keys printing them in order.
# Note it is not necessary to sort the keys as
# the btree will have kept them in order automatically.
foreach (keys %h)
{ print "$_\n" }
untie %h ;
Here is the output from the code above.
mouse
Smith
Wall
There are a few point to bear in mind if you want to change the
ordering in a BTREE database:
=over 5
=item 1.
The new compare function must be specified when you create the database.
=item 2.
You cannot change the ordering once the database has been created. Thus
you must use the same compare function every time you access the
database.
=item 3
Duplicate keys are entirely defined by the comparison function.
In the case-insensitive example above, the keys: 'KEY' and 'key'
would be considered duplicates, and assigning to the second one
would overwrite the first. If duplicates are allowed for (with the
R_DUP flag discussed below), only a single copy of duplicate keys
is stored in the database --- so (again with example above) assigning
three values to the keys: 'KEY', 'Key', and 'key' would leave just
the first key: 'KEY' in the database with three values. For some
situations this results in information loss, so care should be taken
to provide fully qualified comparison functions when necessary.
For example, the above comparison routine could be modified to
additionally compare case-sensitively if two keys are equal in the
case insensitive comparison:
sub compare {
my($key1, $key2) = @_;
lc $key1 cmp lc $key2 ||
$key1 cmp $key2;
}
And now you will only have duplicates when the keys themselves
are truly the same. (note: in versions of the db library prior to
about November 1996, such duplicate keys were retained so it was
possible to recover the original keys in sets of keys that
compared as equal).
=back
=head2 Handling Duplicate Keys
The BTREE file type optionally allows a single key to be associated
with an arbitrary number of values. This option is enabled by setting
the flags element of C<$DB_BTREE> to R_DUP when creating the database.
There are some difficulties in using the tied hash interface if you
want to manipulate a BTREE database with duplicate keys. Consider this
code:
use warnings ;
use strict ;
use DB_File ;
my ($filename, %h) ;
$filename = "tree" ;
unlink $filename ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
# Add some key/value pairs to the file
$h{'Wall'} = 'Larry' ;
$h{'Wall'} = 'Brick' ; # Note the duplicate key
$h{'Wall'} = 'Brick' ; # Note the duplicate key and value
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
# iterate through the associative array
# and print each key/value pair.
foreach (sort keys %h)
{ print "$_ -> $h{$_}\n" }
untie %h ;
Here is the output:
Smith -> John
Wall -> Larry
Wall -> Larry
Wall -> Larry
mouse -> mickey
As you can see 3 records have been successfully created with key C<Wall>
- the only thing is, when they are retrieved from the database they
I<seem> to have the same value, namely C<Larry>. The problem is caused
by the way that the associative array interface works. Basically, when
the associative array interface is used to fetch the value associated
with a given key, it will only ever retrieve the first value.
Although it may not be immediately obvious from the code above, the
associative array interface can be used to write values with duplicate
keys, but it cannot be used to read them back from the database.
The way to get around this problem is to use the Berkeley DB API method
called C<seq>. This method allows sequential access to key/value
pairs. See L<THE API INTERFACE> for details of both the C<seq> method
and the API in general.
Here is the script above rewritten using the C<seq> API method.
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h, $status, $key, $value) ;
$filename = "tree" ;
unlink $filename ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
# Add some key/value pairs to the file
$h{'Wall'} = 'Larry' ;
$h{'Wall'} = 'Brick' ; # Note the duplicate key
$h{'Wall'} = 'Brick' ; # Note the duplicate key and value
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
# iterate through the btree using seq
# and print each key/value pair.
$key = $value = 0 ;
for ($status = $x->seq($key, $value, R_FIRST) ;
$status == 0 ;
$status = $x->seq($key, $value, R_NEXT) )
{ print "$key -> $value\n" }
undef $x ;
untie %h ;
that prints:
Smith -> John
Wall -> Brick
Wall -> Brick
Wall -> Larry
mouse -> mickey
This time we have got all the key/value pairs, including the multiple
values associated with the key C<Wall>.
To make life easier when dealing with duplicate keys, B<DB_File> comes with
a few utility methods.
=head2 The get_dup() Method
The C<get_dup> method assists in
reading duplicate values from BTREE databases. The method can take the
following forms:
$count = $x->get_dup($key) ;
@list = $x->get_dup($key) ;
%list = $x->get_dup($key, 1) ;
In a scalar context the method returns the number of values associated
with the key, C<$key>.
In list context, it returns all the values which match C<$key>. Note
that the values will be returned in an apparently random order.
In list context, if the second parameter is present and evaluates
TRUE, the method returns an associative array. The keys of the
associative array correspond to the values that matched in the BTREE
and the values of the array are a count of the number of times that
particular value occurred in the BTREE.
So assuming the database created above, we can use C<get_dup> like
this:
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h) ;
$filename = "tree" ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
my $cnt = $x->get_dup("Wall") ;
print "Wall occurred $cnt times\n" ;
my %hash = $x->get_dup("Wall", 1) ;
print "Larry is there\n" if $hash{'Larry'} ;
print "There are $hash{'Brick'} Brick Walls\n" ;
my @list = sort $x->get_dup("Wall") ;
print "Wall => [@list]\n" ;
@list = $x->get_dup("Smith") ;
print "Smith => [@list]\n" ;
@list = $x->get_dup("Dog") ;
print "Dog => [@list]\n" ;
and it will print:
Wall occurred 3 times
Larry is there
There are 2 Brick Walls
Wall => [Brick Brick Larry]
Smith => [John]
Dog => []
=head2 The find_dup() Method
$status = $X->find_dup($key, $value) ;
This method checks for the existence of a specific key/value pair. If the
pair exists, the cursor is left pointing to the pair and the method
returns 0. Otherwise the method returns a non-zero value.
Assuming the database from the previous example:
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h, $found) ;
$filename = "tree" ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
$found = ( $x->find_dup("Wall", "Larry") == 0 ? "" : "not") ;
print "Larry Wall is $found there\n" ;
$found = ( $x->find_dup("Wall", "Harry") == 0 ? "" : "not") ;
print "Harry Wall is $found there\n" ;
undef $x ;
untie %h ;
prints this
Larry Wall is there
Harry Wall is not there
=head2 The del_dup() Method
$status = $X->del_dup($key, $value) ;
This method deletes a specific key/value pair. It returns
0 if they exist and have been deleted successfully.
Otherwise the method returns a non-zero value.
Again assuming the existence of the C<tree> database
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h, $found) ;
$filename = "tree" ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
$x->del_dup("Wall", "Larry") ;
$found = ( $x->find_dup("Wall", "Larry") == 0 ? "" : "not") ;
print "Larry Wall is $found there\n" ;
undef $x ;
untie %h ;
prints this
Larry Wall is not there
=head2 Matching Partial Keys
The BTREE interface has a feature which allows partial keys to be
matched. This functionality is I<only> available when the C<seq> method
is used along with the R_CURSOR flag.
$x->seq($key, $value, R_CURSOR) ;
Here is the relevant quote from the dbopen man page where it defines
the use of the R_CURSOR flag with seq:
Note, for the DB_BTREE access method, the returned key is not
necessarily an exact match for the specified key. The returned key
is the smallest key greater than or equal to the specified key,
permitting partial key matches and range searches.
In the example script below, the C<match> sub uses this feature to find
and print the first matching key/value pair given a partial key.
use warnings ;
use strict ;
use DB_File ;
use Fcntl ;
my ($filename, $x, %h, $st, $key, $value) ;
sub match
{
my $key = shift ;
my $value = 0;
my $orig_key = $key ;
$x->seq($key, $value, R_CURSOR) ;
print "$orig_key\t-> $key\t-> $value\n" ;
}
$filename = "tree" ;
unlink $filename ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
# Add some key/value pairs to the file
$h{'mouse'} = 'mickey' ;
$h{'Wall'} = 'Larry' ;
$h{'Walls'} = 'Brick' ;
$h{'Smith'} = 'John' ;
$key = $value = 0 ;
print "IN ORDER\n" ;
for ($st = $x->seq($key, $value, R_FIRST) ;
$st == 0 ;
$st = $x->seq($key, $value, R_NEXT) )
{ print "$key -> $value\n" }
print "\nPARTIAL MATCH\n" ;
match "Wa" ;
match "A" ;
match "a" ;
undef $x ;
untie %h ;
Here is the output:
IN ORDER
Smith -> John
Wall -> Larry
Walls -> Brick
mouse -> mickey
PARTIAL MATCH
Wa -> Wall -> Larry
A -> Smith -> John
a -> mouse -> mickey
=head1 DB_RECNO
DB_RECNO provides an interface to flat text files. Both variable and
fixed length records are supported.
In order to make RECNO more compatible with Perl, the array offset for
all RECNO arrays begins at 0 rather than 1 as in Berkeley DB.
As with normal Perl arrays, a RECNO array can be accessed using
negative indexes. The index -1 refers to the last element of the array,
-2 the second last, and so on. Attempting to access an element before
the start of the array will raise a fatal run-time error.
=head2 The 'bval' Option
The operation of the bval option warrants some discussion. Here is the
definition of bval from the Berkeley DB 1.85 recno manual page:
The delimiting byte to be used to mark the end of a
record for variable-length records, and the pad charac-
ter for fixed-length records. If no value is speci-
fied, newlines (``\n'') are used to mark the end of
variable-length records and fixed-length records are
padded with spaces.
The second sentence is wrong. In actual fact bval will only default to
C<"\n"> when the openinfo parameter in dbopen is NULL. If a non-NULL
openinfo parameter is used at all, the value that happens to be in bval
will be used. That means you always have to specify bval when making
use of any of the options in the openinfo parameter. This documentation
error will be fixed in the next release of Berkeley DB.
That clarifies the situation with regards Berkeley DB itself. What
about B<DB_File>? Well, the behavior defined in the quote above is
quite useful, so B<DB_File> conforms to it.
That means that you can specify other options (e.g. cachesize) and
still have bval default to C<"\n"> for variable length records, and
space for fixed length records.
Also note that the bval option only allows you to specify a single byte
as a delimiter.
=head2 A Simple Example
Here is a simple example that uses RECNO (if you are using a version
of Perl earlier than 5.004_57 this example won't work -- see
L<Extra RECNO Methods> for a workaround).
use warnings ;
use strict ;
use DB_File ;
my $filename = "text" ;
unlink $filename ;
my @h ;
tie @h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_RECNO
or die "Cannot open file 'text': $!\n" ;
# Add a few key/value pairs to the file
$h[0] = "orange" ;
$h[1] = "blue" ;
$h[2] = "yellow" ;
push @h, "green", "black" ;
my $elements = scalar @h ;
print "The array contains $elements entries\n" ;
my $last = pop @h ;
print "popped $last\n" ;
unshift @h, "white" ;
my $first = shift @h ;
print "shifted $first\n" ;
# Check for existence of a key
print "Element 1 Exists with value $h[1]\n" if $h[1] ;
# use a negative index
print "The last element is $h[-1]\n" ;
print "The 2nd last element is $h[-2]\n" ;
untie @h ;
Here is the output from the script:
The array contains 5 entries
popped black
shifted white
Element 1 Exists with value blue
The last element is green
The 2nd last element is yellow
=head2 Extra RECNO Methods
If you are using a version of Perl earlier than 5.004_57, the tied
array interface is quite limited. In the example script above
C<push>, C<pop>, C<shift>, C<unshift>
or determining the array length will not work with a tied array.
To make the interface more useful for older versions of Perl, a number
of methods are supplied with B<DB_File> to simulate the missing array
operations. All these methods are accessed via the object returned from
the tie call.
Here are the methods:
=over 5
=item B<$X-E<gt>push(list) ;>
Pushes the elements of C<list> to the end of the array.
=item B<$value = $X-E<gt>pop ;>
Removes and returns the last element of the array.
=item B<$X-E<gt>shift>
Removes and returns the first element of the array.
=item B<$X-E<gt>unshift(list) ;>
Pushes the elements of C<list> to the start of the array.
=item B<$X-E<gt>length>
Returns the number of elements in the array.
=item B<$X-E<gt>splice(offset, length, elements);>
Returns a splice of the array.
=back
=head2 Another Example
Here is a more complete example that makes use of some of the methods
described above. It also makes use of the API interface directly (see
L<THE API INTERFACE>).
use warnings ;
use strict ;
my (@h, $H, $file, $i) ;
use DB_File ;
use Fcntl ;
$file = "text" ;
unlink $file ;
$H = tie @h, "DB_File", $file, O_RDWR|O_CREAT, 0666, $DB_RECNO
or die "Cannot open file $file: $!\n" ;
# first create a text file to play with
$h[0] = "zero" ;
$h[1] = "one" ;
$h[2] = "two" ;
$h[3] = "three" ;
$h[4] = "four" ;
# Print the records in order.
#
# The length method is needed here because evaluating a tied
# array in a scalar context does not return the number of
# elements in the array.
print "\nORIGINAL\n" ;
foreach $i (0 .. $H->length - 1) {
print "$i: $h[$i]\n" ;
}
# use the push & pop methods
$a = $H->pop ;
$H->push("last") ;
print "\nThe last record was [$a]\n" ;
# and the shift & unshift methods
$a = $H->shift ;
$H->unshift("first") ;
print "The first record was [$a]\n" ;
# Use the API to add a new record after record 2.
$i = 2 ;
$H->put($i, "Newbie", R_IAFTER) ;
# and a new record before record 1.
$i = 1 ;
$H->put($i, "New One", R_IBEFORE) ;
# delete record 3
$H->del(3) ;
# now print the records in reverse order
print "\nREVERSE\n" ;
for ($i = $H->length - 1 ; $i >= 0 ; -- $i)
{ print "$i: $h[$i]\n" }
# same again, but use the API functions instead
print "\nREVERSE again\n" ;
my ($s, $k, $v) = (0, 0, 0) ;
for ($s = $H->seq($k, $v, R_LAST) ;
$s == 0 ;
$s = $H->seq($k, $v, R_PREV))
{ print "$k: $v\n" }
undef $H ;
untie @h ;
and this is what it outputs:
ORIGINAL
0: zero
1: one
2: two
3: three
4: four
The last record was [four]
The first record was [zero]
REVERSE
5: last
4: three
3: Newbie
2: one
1: New One
0: first
REVERSE again
5: last
4: three
3: Newbie
2: one
1: New One
0: first
Notes:
=over 5
=item 1.
Rather than iterating through the array, C<@h> like this:
foreach $i (@h)
it is necessary to use either this:
foreach $i (0 .. $H->length - 1)
or this:
for ($a = $H->get($k, $v, R_FIRST) ;
$a == 0 ;
$a = $H->get($k, $v, R_NEXT) )
=item 2.
Notice that both times the C<put> method was used the record index was
specified using a variable, C<$i>, rather than the literal value
itself. This is because C<put> will return the record number of the
inserted line via that parameter.
=back
=head1 THE API INTERFACE
As well as accessing Berkeley DB using a tied hash or array, it is also
possible to make direct use of most of the API functions defined in the
Berkeley DB documentation.
To do this you need to store a copy of the object returned from the tie.
$db = tie %hash, "DB_File", "filename" ;
Once you have done that, you can access the Berkeley DB API functions
as B<DB_File> methods directly like this:
$db->put($key, $value, R_NOOVERWRITE) ;
B<Important:> If you have saved a copy of the object returned from
C<tie>, the underlying database file will I<not> be closed until both
the tied variable is untied and all copies of the saved object are
destroyed.
use DB_File ;
$db = tie %hash, "DB_File", "filename"
or die "Cannot tie filename: $!" ;
...
undef $db ;
untie %hash ;
See L<The untie() Gotcha> for more details.
All the functions defined in L<dbopen> are available except for
close() and dbopen() itself. The B<DB_File> method interface to the
supported functions have been implemented to mirror the way Berkeley DB
works whenever possible. In particular note that:
=over 5
=item *
The methods return a status value. All return 0 on success.
All return -1 to signify an error and set C<$!> to the exact
error code. The return code 1 generally (but not always) means that the
key specified did not exist in the database.
Other return codes are defined. See below and in the Berkeley DB
documentation for details. The Berkeley DB documentation should be used
as the definitive source.
=item *
Whenever a Berkeley DB function returns data via one of its parameters,
the equivalent B<DB_File> method does exactly the same.
=item *
If you are careful, it is possible to mix API calls with the tied
hash/array interface in the same piece of code. Although only a few of
the methods used to implement the tied interface currently make use of
the cursor, you should always assume that the cursor has been changed
any time the tied hash/array interface is used. As an example, this
code will probably not do what you expect:
$X = tie %x, 'DB_File', $filename, O_RDWR|O_CREAT, 0777, $DB_BTREE
or die "Cannot tie $filename: $!" ;
# Get the first key/value pair and set the cursor
$X->seq($key, $value, R_FIRST) ;
# this line will modify the cursor
$count = scalar keys %x ;
# Get the second key/value pair.
# oops, it didn't, it got the last key/value pair!
$X->seq($key, $value, R_NEXT) ;
The code above can be rearranged to get around the problem, like this:
$X = tie %x, 'DB_File', $filename, O_RDWR|O_CREAT, 0777, $DB_BTREE
or die "Cannot tie $filename: $!" ;
# this line will modify the cursor
$count = scalar keys %x ;
# Get the first key/value pair and set the cursor
$X->seq($key, $value, R_FIRST) ;
# Get the second key/value pair.
# worked this time.
$X->seq($key, $value, R_NEXT) ;
=back
All the constants defined in L<dbopen> for use in the flags parameters
in the methods defined below are also available. Refer to the Berkeley
DB documentation for the precise meaning of the flags values.
Below is a list of the methods available.
=over 5
=item B<$status = $X-E<gt>get($key, $value [, $flags]) ;>
Given a key (C<$key>) this method reads the value associated with it
from the database. The value read from the database is returned in the
C<$value> parameter.
If the key does not exist the method returns 1.
No flags are currently defined for this method.
=item B<$status = $X-E<gt>put($key, $value [, $flags]) ;>
Stores the key/value pair in the database.
If you use either the R_IAFTER or R_IBEFORE flags, the C<$key> parameter
will have the record number of the inserted key/value pair set.
Valid flags are R_CURSOR, R_IAFTER, R_IBEFORE, R_NOOVERWRITE and
R_SETCURSOR.
=item B<$status = $X-E<gt>del($key [, $flags]) ;>
Removes all key/value pairs with key C<$key> from the database.
A return code of 1 means that the requested key was not in the
database.
R_CURSOR is the only valid flag at present.
=item B<$status = $X-E<gt>fd ;>
Returns the file descriptor for the underlying database.
See L<Locking: The Trouble with fd> for an explanation for why you should
not use C<fd> to lock your database.
=item B<$status = $X-E<gt>seq($key, $value, $flags) ;>
This interface allows sequential retrieval from the database. See
L<dbopen> for full details.
Both the C<$key> and C<$value> parameters will be set to the key/value
pair read from the database.
The flags parameter is mandatory. The valid flag values are R_CURSOR,
R_FIRST, R_LAST, R_NEXT and R_PREV.
=item B<$status = $X-E<gt>sync([$flags]) ;>
Flushes any cached buffers to disk.
R_RECNOSYNC is the only valid flag at present.
=back
=head1 DBM FILTERS
A DBM Filter is a piece of code that is be used when you I<always> want to
make the same transformation to all keys and/or values in a DBM database.
An example is when you need to encode your data in UTF-8 before writing to
the database and then decode the UTF-8 when reading from the database file.
There are two ways to use a DBM Filter.
=over 5
=item 1.
Using the low-level API defined below.
=item 2.
Using the L<DBM_Filter> module.
This module hides the complexity of the API defined below and comes
with a number of "canned" filters that cover some of the common use-cases.
=back
Use of the L<DBM_Filter> module is recommended.
=head2 DBM Filter Low-level API
There are four methods associated with DBM Filters. All work identically,
and each is used to install (or uninstall) a single DBM Filter. Each
expects a single parameter, namely a reference to a sub. The only
difference between them is the place that the filter is installed.
To summarise:
=over 5
=item B<filter_store_key>
If a filter has been installed with this method, it will be invoked
every time you write a key to a DBM database.
=item B<filter_store_value>
If a filter has been installed with this method, it will be invoked
every time you write a value to a DBM database.
=item B<filter_fetch_key>
If a filter has been installed with this method, it will be invoked
every time you read a key from a DBM database.
=item B<filter_fetch_value>
If a filter has been installed with this method, it will be invoked
every time you read a value from a DBM database.
=back
You can use any combination of the methods, from none, to all four.
All filter methods return the existing filter, if present, or C<undef>
in not.
To delete a filter pass C<undef> to it.
=head2 The Filter
When each filter is called by Perl, a local copy of C<$_> will contain
the key or value to be filtered. Filtering is achieved by modifying
the contents of C<$_>. The return code from the filter is ignored.
=head2 An Example -- the NULL termination problem.
Consider the following scenario. You have a DBM database
that you need to share with a third-party C application. The C application
assumes that I<all> keys and values are NULL terminated. Unfortunately
when Perl writes to DBM databases it doesn't use NULL termination, so
your Perl application will have to manage NULL termination itself. When
you write to the database you will have to use something like this:
$hash{"$key\0"} = "$value\0" ;
Similarly the NULL needs to be taken into account when you are considering
the length of existing keys/values.
It would be much better if you could ignore the NULL terminations issue
in the main application code and have a mechanism that automatically
added the terminating NULL to all keys and values whenever you write to
the database and have them removed when you read from the database. As I'm
sure you have already guessed, this is a problem that DBM Filters can
fix very easily.
use warnings ;
use strict ;
use DB_File ;
my %hash ;
my $filename = "filt" ;
unlink $filename ;
my $db = tie %hash, 'DB_File', $filename, O_CREAT|O_RDWR, 0666, $DB_HASH
or die "Cannot open $filename: $!\n" ;
# Install DBM Filters
$db->filter_fetch_key ( sub { s/\0$// } ) ;
$db->filter_store_key ( sub { $_ .= "\0" } ) ;
$db->filter_fetch_value( sub { s/\0$// } ) ;
$db->filter_store_value( sub { $_ .= "\0" } ) ;
$hash{"abc"} = "def" ;
my $a = $hash{"ABC"} ;
# ...
undef $db ;
untie %hash ;
Hopefully the contents of each of the filters should be
self-explanatory. Both "fetch" filters remove the terminating NULL,
and both "store" filters add a terminating NULL.
=head2 Another Example -- Key is a C int.
Here is another real-life example. By default, whenever Perl writes to
a DBM database it always writes the key and value as strings. So when
you use this:
$hash{12345} = "something" ;
the key 12345 will get stored in the DBM database as the 5 byte string
"12345". If you actually want the key to be stored in the DBM database
as a C int, you will have to use C<pack> when writing, and C<unpack>
when reading.
Here is a DBM Filter that does it:
use warnings ;
use strict ;
use DB_File ;
my %hash ;
my $filename = "filt" ;
unlink $filename ;
my $db = tie %hash, 'DB_File', $filename, O_CREAT|O_RDWR, 0666, $DB_HASH
or die "Cannot open $filename: $!\n" ;
$db->filter_fetch_key ( sub { $_ = unpack("i", $_) } ) ;
$db->filter_store_key ( sub { $_ = pack ("i", $_) } ) ;
$hash{123} = "def" ;
# ...
undef $db ;
untie %hash ;
This time only two filters have been used -- we only need to manipulate
the contents of the key, so it wasn't necessary to install any value
filters.
=head1 HINTS AND TIPS
=head2 Locking: The Trouble with fd
Until version 1.72 of this module, the recommended technique for locking
B<DB_File> databases was to flock the filehandle returned from the "fd"
function. Unfortunately this technique has been shown to be fundamentally
flawed (Kudos to David Harris for tracking this down). Use it at your own
peril!
The locking technique went like this.
$db = tie(%db, 'DB_File', 'foo.db', O_CREAT|O_RDWR, 0644)
|| die "dbcreat foo.db $!";
$fd = $db->fd;
open(DB_FH, "+<&=$fd") || die "dup $!";
flock (DB_FH, LOCK_EX) || die "flock: $!";
...
$db{"Tom"} = "Jerry" ;
...
flock(DB_FH, LOCK_UN);
undef $db;
untie %db;
close(DB_FH);
In simple terms, this is what happens:
=over 5
=item 1.
Use "tie" to open the database.
=item 2.
Lock the database with fd & flock.
=item 3.
Read & Write to the database.
=item 4.
Unlock and close the database.
=back
Here is the crux of the problem. A side-effect of opening the B<DB_File>
database in step 2 is that an initial block from the database will get
read from disk and cached in memory.
To see why this is a problem, consider what can happen when two processes,
say "A" and "B", both want to update the same B<DB_File> database
using the locking steps outlined above. Assume process "A" has already
opened the database and has a write lock, but it hasn't actually updated
the database yet (it has finished step 2, but not started step 3 yet). Now
process "B" tries to open the same database - step 1 will succeed,
but it will block on step 2 until process "A" releases the lock. The
important thing to notice here is that at this point in time both
processes will have cached identical initial blocks from the database.
Now process "A" updates the database and happens to change some of the
data held in the initial buffer. Process "A" terminates, flushing
all cached data to disk and releasing the database lock. At this point
the database on disk will correctly reflect the changes made by process
"A".
With the lock released, process "B" can now continue. It also updates the
database and unfortunately it too modifies the data that was in its
initial buffer. Once that data gets flushed to disk it will overwrite
some/all of the changes process "A" made to the database.
The result of this scenario is at best a database that doesn't contain
what you expect. At worst the database will corrupt.
The above won't happen every time competing process update the same
B<DB_File> database, but it does illustrate why the technique should
not be used.
=head2 Safe ways to lock a database
Starting with version 2.x, Berkeley DB has internal support for locking.
The companion module to this one, B<BerkeleyDB>, provides an interface
to this locking functionality. If you are serious about locking
Berkeley DB databases, I strongly recommend using B<BerkeleyDB>.
If using B<BerkeleyDB> isn't an option, there are a number of modules
available on CPAN that can be used to implement locking. Each one
implements locking differently and has different goals in mind. It is
therefore worth knowing the difference, so that you can pick the right
one for your application. Here are the three locking wrappers:
=over 5
=item B<Tie::DB_Lock>
A B<DB_File> wrapper which creates copies of the database file for
read access, so that you have a kind of a multiversioning concurrent read
system. However, updates are still serial. Use for databases where reads
may be lengthy and consistency problems may occur.
=item B<Tie::DB_LockFile>
A B<DB_File> wrapper that has the ability to lock and unlock the database
while it is being used. Avoids the tie-before-flock problem by simply
re-tie-ing the database when you get or drop a lock. Because of the
flexibility in dropping and re-acquiring the lock in the middle of a
session, this can be massaged into a system that will work with long
updates and/or reads if the application follows the hints in the POD
documentation.
=item B<DB_File::Lock>
An extremely lightweight B<DB_File> wrapper that simply flocks a lockfile
before tie-ing the database and drops the lock after the untie. Allows
one to use the same lockfile for multiple databases to avoid deadlock
problems, if desired. Use for databases where updates are reads are
quick and simple flock locking semantics are enough.
=back
=head2 Sharing Databases With C Applications
There is no technical reason why a Berkeley DB database cannot be
shared by both a Perl and a C application.
The vast majority of problems that are reported in this area boil down
to the fact that C strings are NULL terminated, whilst Perl strings are
not. See L<DBM FILTERS> for a generic way to work around this problem.
Here is a real example. Netscape 2.0 keeps a record of the locations you
visit along with the time you last visited them in a DB_HASH database.
This is usually stored in the file F<~/.netscape/history.db>. The key
field in the database is the location string and the value field is the
time the location was last visited stored as a 4 byte binary value.
If you haven't already guessed, the location string is stored with a
terminating NULL. This means you need to be careful when accessing the
database.
Here is a snippet of code that is loosely based on Tom Christiansen's
I<ggh> script (available from your nearest CPAN archive in
F<authors/id/TOMC/scripts/nshist.gz>).
use warnings ;
use strict ;
use DB_File ;
use Fcntl ;
my ($dotdir, $HISTORY, %hist_db, $href, $binary_time, $date) ;
$dotdir = $ENV{HOME} || $ENV{LOGNAME};
$HISTORY = "$dotdir/.netscape/history.db";
tie %hist_db, 'DB_File', $HISTORY
or die "Cannot open $HISTORY: $!\n" ;;
# Dump the complete database
while ( ($href, $binary_time) = each %hist_db ) {
# remove the terminating NULL
$href =~ s/\x00$// ;
# convert the binary time into a user friendly string
$date = localtime unpack("V", $binary_time);
print "$date $href\n" ;
}
# check for the existence of a specific key
# remember to add the NULL
if ( $binary_time = $hist_db{"http://mox.perl.com/\x00"} ) {
$date = localtime unpack("V", $binary_time) ;
print "Last visited mox.perl.com on $date\n" ;
}
else {
print "Never visited mox.perl.com\n"
}
untie %hist_db ;
=head2 The untie() Gotcha
If you make use of the Berkeley DB API, it is I<very> strongly
recommended that you read L<perltie/The untie Gotcha>.
Even if you don't currently make use of the API interface, it is still
worth reading it.
Here is an example which illustrates the problem from a B<DB_File>
perspective:
use DB_File ;
use Fcntl ;
my %x ;
my $X ;
$X = tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_TRUNC
or die "Cannot tie first time: $!" ;
$x{123} = 456 ;
untie %x ;
tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_CREAT
or die "Cannot tie second time: $!" ;
untie %x ;
When run, the script will produce this error message:
Cannot tie second time: Invalid argument at bad.file line 14.
Although the error message above refers to the second tie() statement
in the script, the source of the problem is really with the untie()
statement that precedes it.
Having read L<perltie> you will probably have already guessed that the
error is caused by the extra copy of the tied object stored in C<$X>.
If you haven't, then the problem boils down to the fact that the
B<DB_File> destructor, DESTROY, will not be called until I<all>
references to the tied object are destroyed. Both the tied variable,
C<%x>, and C<$X> above hold a reference to the object. The call to
untie() will destroy the first, but C<$X> still holds a valid
reference, so the destructor will not get called and the database file
F<tst.fil> will remain open. The fact that Berkeley DB then reports the
attempt to open a database that is already open via the catch-all
"Invalid argument" doesn't help.
If you run the script with the C<-w> flag the error message becomes:
untie attempted while 1 inner references still exist at bad.file line 12.
Cannot tie second time: Invalid argument at bad.file line 14.
which pinpoints the real problem. Finally the script can now be
modified to fix the original problem by destroying the API object
before the untie:
...
$x{123} = 456 ;
undef $X ;
untie %x ;
$X = tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_CREAT
...
=head1 COMMON QUESTIONS
=head2 Why is there Perl source in my database?
If you look at the contents of a database file created by DB_File,
there can sometimes be part of a Perl script included in it.
This happens because Berkeley DB uses dynamic memory to allocate
buffers which will subsequently be written to the database file. Being
dynamic, the memory could have been used for anything before DB
malloced it. As Berkeley DB doesn't clear the memory once it has been
allocated, the unused portions will contain random junk. In the case
where a Perl script gets written to the database, the random junk will
correspond to an area of dynamic memory that happened to be used during
the compilation of the script.
Unless you don't like the possibility of there being part of your Perl
scripts embedded in a database file, this is nothing to worry about.
=head2 How do I store complex data structures with DB_File?
Although B<DB_File> cannot do this directly, there is a module which
can layer transparently over B<DB_File> to accomplish this feat.
Check out the MLDBM module, available on CPAN in the directory
F<modules/by-module/MLDBM>.
=head2 What does "wide character in subroutine entry" mean?
You will usually get this message if you are working with UTF-8 data and
want to read/write it from/to a Berkeley DB database file.
The easist way to deal with this issue is to use the pre-defined "utf8"
B<DBM_Filter> (see L<DBM_Filter>) that was designed to deal with this
situation.
The example below shows what you need if I<both> the key and value are
expected to be in UTF-8.
use DB_File;
use DBM_Filter;
my $db = tie %h, 'DB_File', '/tmp/try.db', O_CREAT|O_RDWR, 0666, $DB_BTREE;
$db->Filter_Key_Push('utf8');
$db->Filter_Value_Push('utf8');
my $key = "\N{LATIN SMALL LETTER A WITH ACUTE}";
my $value = "\N{LATIN SMALL LETTER E WITH ACUTE}";
$h{ $key } = $value;
=head2 What does "Invalid Argument" mean?
You will get this error message when one of the parameters in the
C<tie> call is wrong. Unfortunately there are quite a few parameters to
get wrong, so it can be difficult to figure out which one it is.
Here are a couple of possibilities:
=over 5
=item 1.
Attempting to reopen a database without closing it.
=item 2.
Using the O_WRONLY flag.
=back
=head2 What does "Bareword 'DB_File' not allowed" mean?
You will encounter this particular error message when you have the
C<strict 'subs'> pragma (or the full strict pragma) in your script.
Consider this script:
use warnings ;
use strict ;
use DB_File ;
my %x ;
tie %x, DB_File, "filename" ;
Running it produces the error in question:
Bareword "DB_File" not allowed while "strict subs" in use
To get around the error, place the word C<DB_File> in either single or
double quotes, like this:
tie %x, "DB_File", "filename" ;
Although it might seem like a real pain, it is really worth the effort
of having a C<use strict> in all your scripts.
=head1 REFERENCES
Articles that are either about B<DB_File> or make use of it.
=over 5
=item 1.
I<Full-Text Searching in Perl>, Tim Kientzle (tkientzle@ddj.com),
Dr. Dobb's Journal, Issue 295, January 1999, pp 34-41
=back
=head1 HISTORY
Moved to the Changes file.
=head1 BUGS
Some older versions of Berkeley DB had problems with fixed length
records using the RECNO file format. This problem has been fixed since
version 1.85 of Berkeley DB.
I am sure there are bugs in the code. If you do find any, or can
suggest any enhancements, I would welcome your comments.
=head1 AVAILABILITY
B<DB_File> comes with the standard Perl source distribution. Look in
the directory F<ext/DB_File>. Given the amount of time between releases
of Perl the version that ships with Perl is quite likely to be out of
date, so the most recent version can always be found on CPAN (see
L<perlmodlib/CPAN> for details), in the directory
F<modules/by-module/DB_File>.
This version of B<DB_File> will work with either version 1.x, 2.x or
3.x of Berkeley DB, but is limited to the functionality provided by
version 1.
The official web site for Berkeley DB is F<http://www.oracle.com/technology/products/berkeley-db/db/index.html>.
All versions of Berkeley DB are available there.
Alternatively, Berkeley DB version 1 is available at your nearest CPAN
archive in F<src/misc/db.1.85.tar.gz>.
=head1 COPYRIGHT
Copyright (c) 1995-2016 Paul Marquess. All rights reserved. This program
is free software; you can redistribute it and/or modify it under the
same terms as Perl itself.
Although B<DB_File> is covered by the Perl license, the library it
makes use of, namely Berkeley DB, is not. Berkeley DB has its own
copyright and its own license. Please take the time to read it.
Here are a few words taken from the Berkeley DB FAQ (at
F<http://www.oracle.com/technology/products/berkeley-db/db/index.html>) regarding the license:
Do I have to license DB to use it in Perl scripts?
No. The Berkeley DB license requires that software that uses
Berkeley DB be freely redistributable. In the case of Perl, that
software is Perl, and not your scripts. Any Perl scripts that you
write are your property, including scripts that make use of
Berkeley DB. Neither the Perl license nor the Berkeley DB license
place any restriction on what you may do with them.
If you are in any doubt about the license situation, contact either the
Berkeley DB authors or the author of DB_File. See L<"AUTHOR"> for details.
=head1 SEE ALSO
L<perl>, L<dbopen(3)>, L<hash(3)>, L<recno(3)>, L<btree(3)>,
L<perldbmfilter>, L<DBM_Filter>
=head1 AUTHOR
The DB_File interface was written by Paul Marquess
E<lt>pmqs@cpan.orgE<gt>.
=cut
Mini Shell