Current File : //usr/include/OpenEXR/ImfStandardAttributes.h
///////////////////////////////////////////////////////////////////////////
//
// Copyright (c) 2004, Industrial Light & Magic, a division of Lucas
// Digital Ltd. LLC
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Industrial Light & Magic nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
///////////////////////////////////////////////////////////////////////////
#ifndef INCLUDED_IMF_STANDARD_ATTRIBUTES_H
#define INCLUDED_IMF_STANDARD_ATTRIBUTES_H
//-----------------------------------------------------------------------------
//
// Optional Standard Attributes -- these attributes are "optional"
// because not every image file header has them, but they define a
// "standard" way to represent commonly used data in the file header.
//
// For each attribute, with name "foo", and type "T", the following
// functions are automatically generated via macros:
//
// void addFoo (Header &header, const T &value);
// bool hasFoo (const Header &header);
// const TypedAttribute<T> & fooAttribute (const Header &header);
// TypedAttribute<T> & fooAttribute (Header &header);
// const T & foo (const Header &Header);
// T & foo (Header &Header);
//
//-----------------------------------------------------------------------------
#include "ImfHeader.h"
#include "ImfBoxAttribute.h"
#include "ImfChromaticitiesAttribute.h"
#include "ImfEnvmapAttribute.h"
#include "ImfDeepImageStateAttribute.h"
#include "ImfFloatAttribute.h"
#include "ImfKeyCodeAttribute.h"
#include "ImfMatrixAttribute.h"
#include "ImfRationalAttribute.h"
#include "ImfStringAttribute.h"
#include "ImfStringVectorAttribute.h"
#include "ImfTimeCodeAttribute.h"
#include "ImfVecAttribute.h"
#include "ImfNamespace.h"
#include "ImfExport.h"
#define IMF_STD_ATTRIBUTE_DEF(name,suffix,object) \
\
OPENEXR_IMF_INTERNAL_NAMESPACE_HEADER_ENTER \
IMF_EXPORT void add##suffix (Header &header, const object &v); \
IMF_EXPORT bool has##suffix (const Header &header); \
IMF_EXPORT const TypedAttribute<object> & \
name##Attribute (const Header &header); \
IMF_EXPORT TypedAttribute<object> & \
name##Attribute (Header &header); \
IMF_EXPORT const object & \
name (const Header &header); \
IMF_EXPORT object & name (Header &header); \
OPENEXR_IMF_INTERNAL_NAMESPACE_HEADER_EXIT \
//
// chromaticities -- for RGB images, specifies the CIE (x,y)
// chromaticities of the primaries and the white point
//
IMF_STD_ATTRIBUTE_DEF (chromaticities, Chromaticities, Chromaticities)
//
// whiteLuminance -- for RGB images, defines the luminance, in Nits
// (candelas per square meter) of the RGB value (1.0, 1.0, 1.0).
//
// If the chromaticities and the whiteLuminance of an RGB image are
// known, then it is possible to convert the image's pixels from RGB
// to CIE XYZ tristimulus values (see function RGBtoXYZ() in header
// file ImfChromaticities.h).
//
//
IMF_STD_ATTRIBUTE_DEF (whiteLuminance, WhiteLuminance, float)
//
// adoptedNeutral -- specifies the CIE (x,y) coordinates that should
// be considered neutral during color rendering. Pixels in the image
// file whose (x,y) coordinates match the adoptedNeutral value should
// be mapped to neutral values on the display.
//
IMF_STD_ATTRIBUTE_DEF (adoptedNeutral, AdoptedNeutral, IMATH_NAMESPACE::V2f)
//
// renderingTransform, lookModTransform -- specify the names of the
// CTL functions that implements the intended color rendering and look
// modification transforms for this image.
//
IMF_STD_ATTRIBUTE_DEF (renderingTransform, RenderingTransform, std::string)
IMF_STD_ATTRIBUTE_DEF (lookModTransform, LookModTransform, std::string)
//
// xDensity -- horizontal output density, in pixels per inch.
// The image's vertical output density is xDensity * pixelAspectRatio.
//
IMF_STD_ATTRIBUTE_DEF (xDensity, XDensity, float)
//
// owner -- name of the owner of the image
//
IMF_STD_ATTRIBUTE_DEF (owner, Owner, std::string)
//
// comments -- additional image information in human-readable
// form, for example a verbal description of the image
//
IMF_STD_ATTRIBUTE_DEF (comments, Comments, std::string)
//
// capDate -- the date when the image was created or captured,
// in local time, and formatted as
//
// YYYY:MM:DD hh:mm:ss
//
// where YYYY is the year (4 digits, e.g. 2003), MM is the month
// (2 digits, 01, 02, ... 12), DD is the day of the month (2 digits,
// 01, 02, ... 31), hh is the hour (2 digits, 00, 01, ... 23), mm
// is the minute, and ss is the second (2 digits, 00, 01, ... 59).
//
//
IMF_STD_ATTRIBUTE_DEF (capDate, CapDate, std::string)
//
// utcOffset -- offset of local time at capDate from
// Universal Coordinated Time (UTC), in seconds:
//
// UTC == local time + utcOffset
//
IMF_STD_ATTRIBUTE_DEF (utcOffset, UtcOffset, float)
//
// longitude, latitude, altitude -- for images of real objects, the
// location where the image was recorded. Longitude and latitude are
// in degrees east of Greenwich and north of the equator. Altitude
// is in meters above sea level. For example, Kathmandu, Nepal is
// at longitude 85.317, latitude 27.717, altitude 1305.
//
IMF_STD_ATTRIBUTE_DEF (longitude, Longitude, float)
IMF_STD_ATTRIBUTE_DEF (latitude, Latitude, float)
IMF_STD_ATTRIBUTE_DEF (altitude, Altitude, float)
//
// focus -- the camera's focus distance, in meters
//
IMF_STD_ATTRIBUTE_DEF (focus, Focus, float)
//
// exposure -- exposure time, in seconds
//
IMF_STD_ATTRIBUTE_DEF (expTime, ExpTime, float)
//
// aperture -- the camera's lens aperture, in f-stops (focal length
// of the lens divided by the diameter of the iris opening)
//
IMF_STD_ATTRIBUTE_DEF (aperture, Aperture, float)
//
// isoSpeed -- the ISO speed of the film or image sensor
// that was used to record the image
//
IMF_STD_ATTRIBUTE_DEF (isoSpeed, IsoSpeed, float)
//
// envmap -- if this attribute is present, the image represents
// an environment map. The attribute's value defines how 3D
// directions are mapped to 2D pixel locations. For details
// see header file ImfEnvmap.h
//
IMF_STD_ATTRIBUTE_DEF (envmap, Envmap, Envmap)
//
// keyCode -- for motion picture film frames. Identifies film
// manufacturer, film type, film roll and frame position within
// the roll.
//
IMF_STD_ATTRIBUTE_DEF (keyCode, KeyCode, KeyCode)
//
// timeCode -- time and control code
//
IMF_STD_ATTRIBUTE_DEF (timeCode, TimeCode, TimeCode)
//
// wrapmodes -- determines how texture map images are extrapolated.
// If an OpenEXR file is used as a texture map for 3D rendering,
// texture coordinates (0.0, 0.0) and (1.0, 1.0) correspond to
// the upper left and lower right corners of the data window.
// If the image is mapped onto a surface with texture coordinates
// outside the zero-to-one range, then the image must be extrapolated.
// This attribute tells the renderer how to do this extrapolation.
// The attribute contains either a pair of comma-separated keywords,
// to specify separate extrapolation modes for the horizontal and
// vertical directions; or a single keyword, to specify extrapolation
// in both directions (e.g. "clamp,periodic" or "clamp"). Extra white
// space surrounding the keywords is allowed, but should be ignored
// by the renderer ("clamp, black " is equivalent to "clamp,black").
// The keywords listed below are predefined; some renderers may support
// additional extrapolation modes:
//
// black pixels outside the zero-to-one range are black
//
// clamp texture coordinates less than 0.0 and greater
// than 1.0 are clamped to 0.0 and 1.0 respectively
//
// periodic the texture image repeats periodically
//
// mirror the texture image repeats periodically, but
// every other instance is mirrored
//
IMF_STD_ATTRIBUTE_DEF (wrapmodes, Wrapmodes, std::string)
//
// framesPerSecond -- defines the nominal playback frame rate for image
// sequences, in frames per second. Every image in a sequence should
// have a framesPerSecond attribute, and the attribute value should be
// the same for all images in the sequence. If an image sequence has
// no framesPerSecond attribute, playback software should assume that
// the frame rate for the sequence is 24 frames per second.
//
// In order to allow exact representation of NTSC frame and field rates,
// framesPerSecond is stored as a rational number. A rational number is
// a pair of integers, n and d, that represents the value n/d.
//
// For the exact values of commonly used frame rates, please see header
// file ImfFramesPerSecond.h.
//
IMF_STD_ATTRIBUTE_DEF (framesPerSecond, FramesPerSecond, Rational)
//
// multiView -- defines the view names for multi-view image files.
// A multi-view image contains two or more views of the same scene,
// as seen from different viewpoints, for example a left-eye and
// a right-eye view for stereo displays. The multiView attribute
// lists the names of the views in an image, and a naming convention
// identifies the channels that belong to each view.
//
// For details, please see header file ImfMultiView.h
//
IMF_STD_ATTRIBUTE_DEF (multiView , MultiView, StringVector)
//
// worldToCamera -- for images generated by 3D computer graphics rendering,
// a matrix that transforms 3D points from the world to the camera coordinate
// space of the renderer.
//
// The camera coordinate space is left-handed. Its origin indicates the
// location of the camera. The positive x and y axes correspond to the
// "right" and "up" directions in the rendered image. The positive z
// axis indicates the camera's viewing direction. (Objects in front of
// the camera have positive z coordinates.)
//
// Camera coordinate space in OpenEXR is the same as in Pixar's Renderman.
//
IMF_STD_ATTRIBUTE_DEF (worldToCamera, WorldToCamera, IMATH_NAMESPACE::M44f)
//
// worldToNDC -- for images generated by 3D computer graphics rendering, a
// matrix that transforms 3D points from the world to the Normalized Device
// Coordinate (NDC) space of the renderer.
//
// NDC is a 2D coordinate space that corresponds to the image plane, with
// positive x and pointing to the right and y positive pointing down. The
// coordinates (0, 0) and (1, 1) correspond to the upper left and lower right
// corners of the OpenEXR display window.
//
// To transform a 3D point in word space into a 2D point in NDC space,
// multiply the 3D point by the worldToNDC matrix and discard the z
// coordinate.
//
// NDC space in OpenEXR is the same as in Pixar's Renderman.
//
IMF_STD_ATTRIBUTE_DEF (worldToNDC, WorldToNDC, IMATH_NAMESPACE::M44f)
//
// deepImageState -- specifies whether the pixels in a deep image are
// sorted and non-overlapping.
//
// Note: this attribute can be set by application code that writes a file
// in order to tell applications that read the file whether the pixel data
// must be cleaned up prior to image processing operations such as flattening.
// The IlmImf library does not verify that the attribute is consistent with
// the actual state of the pixels. Application software may assume that the
// attribute is valid, as long as the software will not crash or lock up if
// any pixels are inconsistent with the deepImageState attribute.
//
IMF_STD_ATTRIBUTE_DEF (deepImageState, DeepImageState, DeepImageState)
//
// originalDataWindow -- if application software crops an image, then it
// should save the data window of the original, un-cropped image in the
// originalDataWindow attribute.
//
IMF_STD_ATTRIBUTE_DEF
(originalDataWindow, OriginalDataWindow, IMATH_NAMESPACE::Box2i)
//
// dwaCompressionLevel -- sets the quality level for images compressed
// with the DWAA or DWAB method.
//
IMF_STD_ATTRIBUTE_DEF (dwaCompressionLevel, DwaCompressionLevel, float)
#endif
Mini Shell