Current File : //usr/share/perl5/pod/perlmodstyle.pod
=head1 NAME
perlmodstyle - Perl module style guide
=head1 INTRODUCTION
This document attempts to describe the Perl Community's "best practice"
for writing Perl modules. It extends the recommendations found in
L<perlstyle> , which should be considered required reading
before reading this document.
While this document is intended to be useful to all module authors, it is
particularly aimed at authors who wish to publish their modules on CPAN.
The focus is on elements of style which are visible to the users of a
module, rather than those parts which are only seen by the module's
developers. However, many of the guidelines presented in this document
can be extrapolated and applied successfully to a module's internals.
This document differs from L<perlnewmod> in that it is a style guide
rather than a tutorial on creating CPAN modules. It provides a
checklist against which modules can be compared to determine whether
they conform to best practice, without necessarily describing in detail
how to achieve this.
All the advice contained in this document has been gleaned from
extensive conversations with experienced CPAN authors and users. Every
piece of advice given here is the result of previous mistakes. This
information is here to help you avoid the same mistakes and the extra
work that would inevitably be required to fix them.
The first section of this document provides an itemized checklist;
subsequent sections provide a more detailed discussion of the items on
the list. The final section, "Common Pitfalls", describes some of the
most popular mistakes made by CPAN authors.
=head1 QUICK CHECKLIST
For more detail on each item in this checklist, see below.
=head2 Before you start
=over 4
=item *
Don't re-invent the wheel
=item *
Patch, extend or subclass an existing module where possible
=item *
Do one thing and do it well
=item *
Choose an appropriate name
=item *
Get feedback before publishing
=back
=head2 The API
=over 4
=item *
API should be understandable by the average programmer
=item *
Simple methods for simple tasks
=item *
Separate functionality from output
=item *
Consistent naming of subroutines or methods
=item *
Use named parameters (a hash or hashref) when there are more than two
parameters
=back
=head2 Stability
=over 4
=item *
Ensure your module works under C<use strict> and C<-w>
=item *
Stable modules should maintain backwards compatibility
=back
=head2 Documentation
=over 4
=item *
Write documentation in POD
=item *
Document purpose, scope and target applications
=item *
Document each publically accessible method or subroutine, including params and return values
=item *
Give examples of use in your documentation
=item *
Provide a README file and perhaps also release notes, changelog, etc
=item *
Provide links to further information (URL, email)
=back
=head2 Release considerations
=over 4
=item *
Specify pre-requisites in Makefile.PL or Build.PL
=item *
Specify Perl version requirements with C<use>
=item *
Include tests with your module
=item *
Choose a sensible and consistent version numbering scheme (X.YY is the common Perl module numbering scheme)
=item *
Increment the version number for every change, no matter how small
=item *
Package the module using "make dist"
=item *
Choose an appropriate license (GPL/Artistic is a good default)
=back
=head1 BEFORE YOU START WRITING A MODULE
Try not to launch headlong into developing your module without spending
some time thinking first. A little forethought may save you a vast
amount of effort later on.
=head2 Has it been done before?
You may not even need to write the module. Check whether it's already
been done in Perl, and avoid re-inventing the wheel unless you have a
good reason.
Good places to look for pre-existing modules include
L<http://search.cpan.org/> and L<https://metacpan.org>
and asking on C<module-authors@perl.org>
(L<http://lists.perl.org/list/module-authors.html>).
If an existing module B<almost> does what you want, consider writing a
patch, writing a subclass, or otherwise extending the existing module
rather than rewriting it.
=head2 Do one thing and do it well
At the risk of stating the obvious, modules are intended to be modular.
A Perl developer should be able to use modules to put together the
building blocks of their application. However, it's important that the
blocks are the right shape, and that the developer shouldn't have to use
a big block when all they need is a small one.
Your module should have a clearly defined scope which is no longer than
a single sentence. Can your module be broken down into a family of
related modules?
Bad example:
"FooBar.pm provides an implementation of the FOO protocol and the
related BAR standard."
Good example:
"Foo.pm provides an implementation of the FOO protocol. Bar.pm
implements the related BAR protocol."
This means that if a developer only needs a module for the BAR standard,
they should not be forced to install libraries for FOO as well.
=head2 What's in a name?
Make sure you choose an appropriate name for your module early on. This
will help people find and remember your module, and make programming
with your module more intuitive.
When naming your module, consider the following:
=over 4
=item *
Be descriptive (i.e. accurately describes the purpose of the module).
=item *
Be consistent with existing modules.
=item *
Reflect the functionality of the module, not the implementation.
=item *
Avoid starting a new top-level hierarchy, especially if a suitable
hierarchy already exists under which you could place your module.
=back
=head2 Get feedback before publishing
If you have never uploaded a module to CPAN before (and even if you have),
you are strongly encouraged to get feedback on L<PrePAN|http://prepan.org>.
PrePAN is a site dedicated to discussing ideas for CPAN modules with other
Perl developers and is a great resource for new (and experienced) Perl
developers.
You should also try to get feedback from people who are already familiar
with the module's application domain and the CPAN naming system. Authors
of similar modules, or modules with similar names, may be a good place to
start, as are community sites like L<Perl Monks|http://www.perlmonks.org>.
=head1 DESIGNING AND WRITING YOUR MODULE
Considerations for module design and coding:
=head2 To OO or not to OO?
Your module may be object oriented (OO) or not, or it may have both kinds
of interfaces available. There are pros and cons of each technique, which
should be considered when you design your API.
In I<Perl Best Practices> (copyright 2004, Published by O'Reilly Media, Inc.),
Damian Conway provides a list of criteria to use when deciding if OO is the
right fit for your problem:
=over 4
=item *
The system being designed is large, or is likely to become large.
=item *
The data can be aggregated into obvious structures, especially if
there's a large amount of data in each aggregate.
=item *
The various types of data aggregate form a natural hierarchy that
facilitates the use of inheritance and polymorphism.
=item *
You have a piece of data on which many different operations are
applied.
=item *
You need to perform the same general operations on related types of
data, but with slight variations depending on the specific type of data
the operations are applied to.
=item *
It's likely you'll have to add new data types later.
=item *
The typical interactions between pieces of data are best represented by
operators.
=item *
The implementation of individual components of the system is likely to
change over time.
=item *
The system design is already object-oriented.
=item *
Large numbers of other programmers will be using your code modules.
=back
Think carefully about whether OO is appropriate for your module.
Gratuitous object orientation results in complex APIs which are
difficult for the average module user to understand or use.
=head2 Designing your API
Your interfaces should be understandable by an average Perl programmer.
The following guidelines may help you judge whether your API is
sufficiently straightforward:
=over 4
=item Write simple routines to do simple things.
It's better to have numerous simple routines than a few monolithic ones.
If your routine changes its behaviour significantly based on its
arguments, it's a sign that you should have two (or more) separate
routines.
=item Separate functionality from output.
Return your results in the most generic form possible and allow the user
to choose how to use them. The most generic form possible is usually a
Perl data structure which can then be used to generate a text report,
HTML, XML, a database query, or whatever else your users require.
If your routine iterates through some kind of list (such as a list of
files, or records in a database) you may consider providing a callback
so that users can manipulate each element of the list in turn.
File::Find provides an example of this with its
C<find(\&wanted, $dir)> syntax.
=item Provide sensible shortcuts and defaults.
Don't require every module user to jump through the same hoops to achieve a
simple result. You can always include optional parameters or routines for
more complex or non-standard behaviour. If most of your users have to
type a few almost identical lines of code when they start using your
module, it's a sign that you should have made that behaviour a default.
Another good indicator that you should use defaults is if most of your
users call your routines with the same arguments.
=item Naming conventions
Your naming should be consistent. For instance, it's better to have:
display_day();
display_week();
display_year();
than
display_day();
week_display();
show_year();
This applies equally to method names, parameter names, and anything else
which is visible to the user (and most things that aren't!)
=item Parameter passing
Use named parameters. It's easier to use a hash like this:
$obj->do_something(
name => "wibble",
type => "text",
size => 1024,
);
... than to have a long list of unnamed parameters like this:
$obj->do_something("wibble", "text", 1024);
While the list of arguments might work fine for one, two or even three
arguments, any more arguments become hard for the module user to
remember, and hard for the module author to manage. If you want to add
a new parameter you will have to add it to the end of the list for
backward compatibility, and this will probably make your list order
unintuitive. Also, if many elements may be undefined you may see the
following unattractive method calls:
$obj->do_something(undef, undef, undef, undef, undef, 1024);
Provide sensible defaults for parameters which have them. Don't make
your users specify parameters which will almost always be the same.
The issue of whether to pass the arguments in a hash or a hashref is
largely a matter of personal style.
The use of hash keys starting with a hyphen (C<-name>) or entirely in
upper case (C<NAME>) is a relic of older versions of Perl in which
ordinary lower case strings were not handled correctly by the C<=E<gt>>
operator. While some modules retain uppercase or hyphenated argument
keys for historical reasons or as a matter of personal style, most new
modules should use simple lower case keys. Whatever you choose, be
consistent!
=back
=head2 Strictness and warnings
Your module should run successfully under the strict pragma and should
run without generating any warnings. Your module should also handle
taint-checking where appropriate, though this can cause difficulties in
many cases.
=head2 Backwards compatibility
Modules which are "stable" should not break backwards compatibility
without at least a long transition phase and a major change in version
number.
=head2 Error handling and messages
When your module encounters an error it should do one or more of:
=over 4
=item *
Return an undefined value.
=item *
set C<$Module::errstr> or similar (C<errstr> is a common name used by
DBI and other popular modules; if you choose something else, be sure to
document it clearly).
=item *
C<warn()> or C<carp()> a message to STDERR.
=item *
C<croak()> only when your module absolutely cannot figure out what to
do. (C<croak()> is a better version of C<die()> for use within
modules, which reports its errors from the perspective of the caller.
See L<Carp> for details of C<croak()>, C<carp()> and other useful
routines.)
=item *
As an alternative to the above, you may prefer to throw exceptions using
the Error module.
=back
Configurable error handling can be very useful to your users. Consider
offering a choice of levels for warning and debug messages, an option to
send messages to a separate file, a way to specify an error-handling
routine, or other such features. Be sure to default all these options
to the commonest use.
=head1 DOCUMENTING YOUR MODULE
=head2 POD
Your module should include documentation aimed at Perl developers.
You should use Perl's "plain old documentation" (POD) for your general
technical documentation, though you may wish to write additional
documentation (white papers, tutorials, etc) in some other format.
You need to cover the following subjects:
=over 4
=item *
A synopsis of the common uses of the module
=item *
The purpose, scope and target applications of your module
=item *
Use of each publically accessible method or subroutine, including
parameters and return values
=item *
Examples of use
=item *
Sources of further information
=item *
A contact email address for the author/maintainer
=back
The level of detail in Perl module documentation generally goes from
less detailed to more detailed. Your SYNOPSIS section should contain a
minimal example of use (perhaps as little as one line of code; skip the
unusual use cases or anything not needed by most users); the
DESCRIPTION should describe your module in broad terms, generally in
just a few paragraphs; more detail of the module's routines or methods,
lengthy code examples, or other in-depth material should be given in
subsequent sections.
Ideally, someone who's slightly familiar with your module should be able
to refresh their memory without hitting "page down". As your reader
continues through the document, they should receive a progressively
greater amount of knowledge.
The recommended order of sections in Perl module documentation is:
=over 4
=item *
NAME
=item *
SYNOPSIS
=item *
DESCRIPTION
=item *
One or more sections or subsections giving greater detail of available
methods and routines and any other relevant information.
=item *
BUGS/CAVEATS/etc
=item *
AUTHOR
=item *
SEE ALSO
=item *
COPYRIGHT and LICENSE
=back
Keep your documentation near the code it documents ("inline"
documentation). Include POD for a given method right above that
method's subroutine. This makes it easier to keep the documentation up
to date, and avoids having to document each piece of code twice (once in
POD and once in comments).
=head2 README, INSTALL, release notes, changelogs
Your module should also include a README file describing the module and
giving pointers to further information (website, author email).
An INSTALL file should be included, and should contain simple installation
instructions. When using ExtUtils::MakeMaker this will usually be:
=over 4
=item perl Makefile.PL
=item make
=item make test
=item make install
=back
When using Module::Build, this will usually be:
=over 4
=item perl Build.PL
=item perl Build
=item perl Build test
=item perl Build install
=back
Release notes or changelogs should be produced for each release of your
software describing user-visible changes to your module, in terms
relevant to the user.
Unless you have good reasons for using some other format
(for example, a format used within your company),
the convention is to name your changelog file C<Changes>,
and to follow the simple format described in L<CPAN::Changes::Spec>.
=head1 RELEASE CONSIDERATIONS
=head2 Version numbering
Version numbers should indicate at least major and minor releases, and
possibly sub-minor releases. A major release is one in which most of
the functionality has changed, or in which major new functionality is
added. A minor release is one in which a small amount of functionality
has been added or changed. Sub-minor version numbers are usually used
for changes which do not affect functionality, such as documentation
patches.
The most common CPAN version numbering scheme looks like this:
1.00, 1.10, 1.11, 1.20, 1.30, 1.31, 1.32
A correct CPAN version number is a floating point number with at least
2 digits after the decimal. You can test whether it conforms to CPAN by
using
perl -MExtUtils::MakeMaker -le 'print MM->parse_version(shift)' \
'Foo.pm'
If you want to release a 'beta' or 'alpha' version of a module but
don't want CPAN.pm to list it as most recent use an '_' after the
regular version number followed by at least 2 digits, eg. 1.20_01. If
you do this, the following idiom is recommended:
our $VERSION = "1.12_01"; # so CPAN distribution will have
# right filename
our $XS_VERSION = $VERSION; # only needed if you have XS code
$VERSION = eval $VERSION; # so "use Module 0.002" won't warn on
# underscore
With that trick MakeMaker will only read the first line and thus read
the underscore, while the perl interpreter will evaluate the $VERSION
and convert the string into a number. Later operations that treat
$VERSION as a number will then be able to do so without provoking a
warning about $VERSION not being a number.
Never release anything (even a one-word documentation patch) without
incrementing the number. Even a one-word documentation patch should
result in a change in version at the sub-minor level.
Once picked, it is important to stick to your version scheme, without
reducing the number of digits. This is because "downstream" packagers,
such as the FreeBSD ports system, interpret the version numbers in
various ways. If you change the number of digits in your version scheme,
you can confuse these systems so they get the versions of your module
out of order, which is obviously bad.
=head2 Pre-requisites
Module authors should carefully consider whether to rely on other
modules, and which modules to rely on.
Most importantly, choose modules which are as stable as possible. In
order of preference:
=over 4
=item *
Core Perl modules
=item *
Stable CPAN modules
=item *
Unstable CPAN modules
=item *
Modules not available from CPAN
=back
Specify version requirements for other Perl modules in the
pre-requisites in your Makefile.PL or Build.PL.
Be sure to specify Perl version requirements both in Makefile.PL or
Build.PL and with C<require 5.6.1> or similar. See the section on
C<use VERSION> of L<perlfunc/require> for details.
=head2 Testing
All modules should be tested before distribution (using "make disttest"),
and the tests should also be available to people installing the modules
(using "make test").
For Module::Build you would use the C<make test> equivalent C<perl Build test>.
The importance of these tests is proportional to the alleged stability of a
module. A module which purports to be
stable or which hopes to achieve wide
use should adhere to as strict a testing regime as possible.
Useful modules to help you write tests (with minimum impact on your
development process or your time) include Test::Simple, Carp::Assert
and Test::Inline.
For more sophisticated test suites there are Test::More and Test::MockObject.
=head2 Packaging
Modules should be packaged using one of the standard packaging tools.
Currently you have the choice between ExtUtils::MakeMaker and the
more platform independent Module::Build, allowing modules to be installed in a
consistent manner.
When using ExtUtils::MakeMaker, you can use "make dist" to create your
package. Tools exist to help you to build your module in a
MakeMaker-friendly style. These include ExtUtils::ModuleMaker and h2xs.
See also L<perlnewmod>.
=head2 Licensing
Make sure that your module has a license, and that the full text of it
is included in the distribution (unless it's a common one and the terms
of the license don't require you to include it).
If you don't know what license to use, dual licensing under the GPL
and Artistic licenses (the same as Perl itself) is a good idea.
See L<perlgpl> and L<perlartistic>.
=head1 COMMON PITFALLS
=head2 Reinventing the wheel
There are certain application spaces which are already very, very well
served by CPAN. One example is templating systems, another is date and
time modules, and there are many more. While it is a rite of passage to
write your own version of these things, please consider carefully
whether the Perl world really needs you to publish it.
=head2 Trying to do too much
Your module will be part of a developer's toolkit. It will not, in
itself, form the B<entire> toolkit. It's tempting to add extra features
until your code is a monolithic system rather than a set of modular
building blocks.
=head2 Inappropriate documentation
Don't fall into the trap of writing for the wrong audience. Your
primary audience is a reasonably experienced developer with at least
a moderate understanding of your module's application domain, who's just
downloaded your module and wants to start using it as quickly as possible.
Tutorials, end-user documentation, research papers, FAQs etc are not
appropriate in a module's main documentation. If you really want to
write these, include them as sub-documents such as C<My::Module::Tutorial> or
C<My::Module::FAQ> and provide a link in the SEE ALSO section of the
main documentation.
=head1 SEE ALSO
=over 4
=item L<perlstyle>
General Perl style guide
=item L<perlnewmod>
How to create a new module
=item L<perlpod>
POD documentation
=item L<podchecker>
Verifies your POD's correctness
=item Packaging Tools
L<ExtUtils::MakeMaker>, L<Module::Build>
=item Testing tools
L<Test::Simple>, L<Test::Inline>, L<Carp::Assert>, L<Test::More>, L<Test::MockObject>
=item L<http://pause.perl.org/>
Perl Authors Upload Server. Contains links to information for module
authors.
=item Any good book on software engineering
=back
=head1 AUTHOR
Kirrily "Skud" Robert <skud@cpan.org>
Mini Shell